Qualcomm ARM64 DT updates for v5.19

This adds MDIO bus description on the IPQ6018 platform.

On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.

MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.

On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.

On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.

The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.

On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.

On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards.  On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.

SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.

On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.

On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.

Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.

On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.

On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.

Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
-----BEGIN PGP SIGNATURE-----
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=cBVa
-----END PGP SIGNATURE-----