diff options
Diffstat (limited to 'drivers/arm/peripherals/pl011/pl011.h')
| -rw-r--r-- | drivers/arm/peripherals/pl011/pl011.h | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/drivers/arm/peripherals/pl011/pl011.h b/drivers/arm/peripherals/pl011/pl011.h new file mode 100644 index 0000000..53b4dab --- /dev/null +++ b/drivers/arm/peripherals/pl011/pl011.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2013, ARM Limited. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __PL011_H__ +#define __PL011_H__ + +/* PL011 Registers */ +#define UARTDR 0x000 +#define UARTRSR 0x004 +#define UARTECR 0x004 +#define UARTFR 0x018 +#define UARTILPR 0x020 +#define UARTIBRD 0x024 +#define UARTFBRD 0x028 +#define UARTLCR_H 0x02C +#define UARTCR 0x030 +#define UARTIFLS 0x034 +#define UARTIMSC 0x038 +#define UARTRIS 0x03C +#define UARTMIS 0x040 +#define UARTICR 0x044 +#define UARTDMACR 0x048 + +/* Data status bits */ +#define UART_DATA_ERROR_MASK 0x0F00 + +/* Status reg bits */ +#define UART_STATUS_ERROR_MASK 0x0F + +/* Flag reg bits */ +#define PL011_UARTFR_RI (1 << 8) /* Ring indicator */ +#define PL011_UARTFR_TXFE (1 << 7) /* Transmit FIFO empty */ +#define PL011_UARTFR_RXFF (1 << 6) /* Receive FIFO full */ +#define PL011_UARTFR_TXFF (1 << 5) /* Transmit FIFO full */ +#define PL011_UARTFR_RXFE (1 << 4) /* Receive FIFO empty */ +#define PL011_UARTFR_BUSY (1 << 3) /* UART busy */ +#define PL011_UARTFR_DCD (1 << 2) /* Data carrier detect */ +#define PL011_UARTFR_DSR (1 << 1) /* Data set ready */ +#define PL011_UARTFR_CTS (1 << 0) /* Clear to send */ + +/* Control reg bits */ +#define PL011_UARTCR_CTSEN (1 << 15) /* CTS hardware flow control enable */ +#define PL011_UARTCR_RTSEN (1 << 14) /* RTS hardware flow control enable */ +#define PL011_UARTCR_RTS (1 << 11) /* Request to send */ +#define PL011_UARTCR_DTR (1 << 10) /* Data transmit ready. */ +#define PL011_UARTCR_RXE (1 << 9) /* Receive enable */ +#define PL011_UARTCR_TXE (1 << 8) /* Transmit enable */ +#define PL011_UARTCR_LBE (1 << 7) /* Loopback enable */ +#define PL011_UARTCR_UARTEN (1 << 0) /* UART Enable */ + +#if !defined(PL011_BASE) +#error "The PL011_BASE macro must be defined." +#endif + +#if !defined(PL011_BAUDRATE) +#define PL011_BAUDRATE 115200 +#endif + +#if !defined(PL011_CLK_IN_HZ) +#define PL011_CLK_IN_HZ 24000000 +#endif + +#if !defined(PL011_LINE_CONTROL) +/* FIFO Enabled / No Parity / 8 Data bit / One Stop Bit */ +#define PL011_LINE_CONTROL (PL011_UARTLCR_H_FEN | PL011_UARTLCR_H_WLEN_8) +#endif + +/* Line Control Register Bits */ +#define PL011_UARTLCR_H_SPS (1 << 7) /* Stick parity select */ +#define PL011_UARTLCR_H_WLEN_8 (3 << 5) +#define PL011_UARTLCR_H_WLEN_7 (2 << 5) +#define PL011_UARTLCR_H_WLEN_6 (1 << 5) +#define PL011_UARTLCR_H_WLEN_5 (0 << 5) +#define PL011_UARTLCR_H_FEN (1 << 4) /* FIFOs Enable */ +#define PL011_UARTLCR_H_STP2 (1 << 3) /* Two stop bits select */ +#define PL011_UARTLCR_H_EPS (1 << 2) /* Even parity select */ +#define PL011_UARTLCR_H_PEN (1 << 1) /* Parity Enable */ +#define PL011_UARTLCR_H_BRK (1 << 0) /* Send break */ + +#endif /* __PL011_H__ */ |