diff options
Diffstat (limited to 'android/images/armv8-juice-juno-lsk/HOWTO_install.txt')
| -rw-r--r-- | android/images/armv8-juice-juno-lsk/HOWTO_install.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt index 2cdc49a..8834800 100644 --- a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt +++ b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt @@ -132,7 +132,7 @@ The example below shows how a test system was configured. Please note: some of Also take care that the USB partitions are showing in the menu before selecting a menu option. There is a known bug in UEFI where the partitions on USB drives does not show the first time the menu is displayed. To overcome this, as shown in the example below, the user should enter the menu option @"[1] Add Boot Device Entry"@, by pressing @1@ followed by the enter key. Then, when the list display and the USB partitions are missing, please press the @ESC@ key once. This will exit out of the current menu prompt and leave you back at the Boot Menu again. At this point, please press 1 again to re-enter the menu option @"[1] Add Boot Device Entry"@ and continue by selecting the partition named "boot" on the USB drive. -UEFI outputs to UART0 on the board. UART0 uses 115200 baud with 8 bits and no stop bit. Please see the "UARTs" section on the "Getting Started tab":https://releases.linaro.org/14.06/openembedded/juno-lsk/#tabs-4 for more details on the UART configuration of the board. +UEFI outputs to UART0 on the board. UART0 uses 115200 baud with 8 bits and no stop bit. Please see the "UARTs" section on the "Getting Started tab":https://releases.linaro.org/14.06/android/images/armv8-juice-juno-lsk/#tabs-4 for more details on the UART configuration of the board. h3. Example UEFI Configuration |