diff options
Diffstat (limited to 'openembedded/vexpress-lsk/INSTALL.textile')
| -rw-r--r-- | openembedded/vexpress-lsk/INSTALL.textile | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/openembedded/vexpress-lsk/INSTALL.textile b/openembedded/vexpress-lsk/INSTALL.textile index fa9803c..5b5df5c 100644 --- a/openembedded/vexpress-lsk/INSTALL.textile +++ b/openembedded/vexpress-lsk/INSTALL.textile @@ -7,7 +7,7 @@ Linaro provides two methods for installing Linaro binary builds: h2. Pre-Installation Steps -Before any installation begins, it is important that you ensure you Versatile Express board has the latest firmware and boot loader installed. Please check the "Firmware Update" tab on this page for the latest updates and installation instructions. +Before any installation begins, it is important that you ensure your Versatile Express board has the latest firmware and boot loader installed. Please check the "Firmware Update" tab on this page for the latest updates and installation instructions. h2. Using pre-built image @@ -82,5 +82,5 @@ h2. Booting the image After the media create tool has finished executing, remove the SD card from your PC and insert it into the Versatile Express board. -Before you can boot the image you will need to install the UEFI boot loader into NOR flash and update the Versatile MMC card configuration files. The instructions on the Firmware Update tab provide information on how to do this and how to configure UEFI to specify the SD card as a boot device. +Before you can boot the image you will need to install the UEFI boot loader into NOR flash and update the Versatile Express motherboard's configuration files. The instructions on the Firmware Update tab provide information on how to do this and how to configure UEFI to specify the SD card as a boot device. |