Merge commit 'v2.6.36.4' into linaro-2.6.36HEAD master

author: Nicolas Pitre <nicolas.pitre@linaro.org> 2011-02-18 14:46:19 -0500
committer: Nicolas Pitre <nicolas.pitre@linaro.org> 2011-02-18 14:46:19 -0500
commit: c49f87aa34f7fa4850b8838a945475e4062bad61 (patch)
tree: e2d8af4d57671aa35798c1ddca503974ba40fff0 /drivers
parent: a12fc999485eb5d9ecad74554f0baac9688d28e2 (diff)
parent: 69ad303ab8321656d6144d13b2444a5595bb6581 (diff)
116 files changed, 1111 insertions, 440 deletions
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 8cc536e49a0..d7d8026cde9 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -610,7 +610,7 @@ static struct scsi_host_template mpc52xx_ata_sht = {
 };
 
 static struct ata_port_operations mpc52xx_ata_port_ops = {
-	.inherits		= &ata_sff_port_ops,
+	.inherits		= &ata_bmdma_port_ops,
 	.sff_dev_select		= mpc52xx_ata_dev_select,
 	.set_piomode		= mpc52xx_ata_set_piomode,
 	.set_dmamode		= mpc52xx_ata_set_dmamode,
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 47350deb0e0..aa5c782bf01 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -927,20 +927,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
 	/*
-	* If the device has not been properly setup, the following will catch
-	* the problem and should stop the system from crashing.
-	* 20030610 - hamish@zot.org
-	*/
-	if (pci_enable_device(pdev)) {
-		dev_err(&pdev->dev, "can't enable PCI device\n");
-		agp_put_bridge(bridge);
-		return -ENODEV;
-	}
-
-	/*
 	* The following fixes the case where the BIOS has "forgotten" to
 	* provide an address range for the GART.
 	* 20030610 - hamish@zot.org
+	* This happens before pci_enable_device() intentionally;
+	* calling pci_enable_device() before assigning the resource
+	* will result in the GART being disabled on machines with such
+	* BIOSs (the GART ends up with a BAR starting at 0, which
+	* conflicts a lot of other devices).
 	*/
 	r = &pdev->resource[0];
 	if (!r->start && r->end) {
@@ -951,6 +945,17 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 		}
 	}
 
+	/*
+	* If the device has not been properly setup, the following will catch
+	* the problem and should stop the system from crashing.
+	* 20030610 - hamish@zot.org
+	*/
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "can't enable PCI device\n");
+		agp_put_bridge(bridge);
+		return -ENODEV;
+	}
+
 	/* Fill in the mode register */
 	if (cap_ptr) {
 		pci_read_config_dword(pdev,
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 501f115333e..22abd188fe1 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -320,6 +320,7 @@ static int unload_when_empty = 1;
 static int add_smi(struct smi_info *smi);
 static int try_smi_init(struct smi_info *smi);
 static void cleanup_one_si(struct smi_info *to_clean);
+static void cleanup_ipmi_si(void);
 
 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
 static int register_xaction_notifier(struct notifier_block *nb)
@@ -3436,16 +3437,7 @@ static __devinit int init_ipmi_si(void)
 	mutex_lock(&smi_infos_lock);
 	if (unload_when_empty && list_empty(&smi_infos)) {
 		mutex_unlock(&smi_infos_lock);
-#ifdef CONFIG_PCI
-		if (pci_registered)
-			pci_unregister_driver(&ipmi_pci_driver);
-#endif
-
-#ifdef CONFIG_PPC_OF
-		if (of_registered)
-			of_unregister_platform_driver(&ipmi_of_platform_driver);
-#endif
-		driver_unregister(&ipmi_driver.driver);
+		cleanup_ipmi_si();
 		printk(KERN_WARNING PFX
 		       "Unable to find any System Interface(s)\n");
 		return -ENODEV;
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 05ad4a17a28..2ec5f33cdbd 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -354,12 +354,14 @@ unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
 		    tpm_protected_ordinal_duration[ordinal &
 						   TPM_PROTECTED_ORDINAL_MASK];
 
-	if (duration_idx != TPM_UNDEFINED)
+	if (duration_idx != TPM_UNDEFINED) {
 		duration = chip->vendor.duration[duration_idx];
-	if (duration <= 0)
+		/* if duration is 0, it's because chip->vendor.duration wasn't */
+		/* filled yet, so we set the lowest timeout just to give enough */
+		/* time for tpm_get_timeouts() to succeed */
+		return (duration <= 0 ? HZ : duration);
+	} else
 		return 2 * 60 * HZ;
-	else
-		return duration;
 }
 EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
 
@@ -565,9 +567,11 @@ duration:
 	if (rc)
 		return;
 
-	if (be32_to_cpu(tpm_cmd.header.out.return_code)
-	    != 3 * sizeof(u32))
+	if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
+	    be32_to_cpu(tpm_cmd.header.out.length)
+	    != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
 		return;
+
 	duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
 	chip->vendor.duration[TPM_SHORT] =
 	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -911,6 +915,18 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
 
+ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d %d %d\n",
+	               jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
+	               jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
+	               jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
+}
+EXPORT_SYMBOL_GPL(tpm_show_timeouts);
+
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 792868d24f2..ba1779c2cff 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,6 +56,8 @@ extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
 				char *);
 extern ssize_t tpm_show_temp_deactivated(struct device *,
 					 struct device_attribute *attr, char *);
+extern ssize_t tpm_show_timeouts(struct device *,
+				 struct device_attribute *attr, char *);
 
 struct tpm_chip;
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 1030f842013..3e1f2bbeec1 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
+#include <linux/acpi.h>
 #include "tpm.h"
 
 #define TPM_HEADER_SIZE 10
@@ -78,6 +79,26 @@ enum tis_defaults {
 static LIST_HEAD(tis_chips);
 static DEFINE_SPINLOCK(tis_lock);
 
+#ifdef CONFIG_ACPI
+static int is_itpm(struct pnp_dev *dev)
+{
+	struct acpi_device *acpi = pnp_acpi_device(dev);
+	struct acpi_hardware_id *id;
+
+	list_for_each_entry(id, &acpi->pnp.ids, list) {
+		if (!strcmp("INTC0102", id->id))
+			return 1;
+	}
+
+	return 0;
+}
+#else
+static int is_itpm(struct pnp_dev *dev)
+{
+	return 0;
+}
+#endif
+
 static int check_locality(struct tpm_chip *chip, int l)
 {
 	if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
@@ -355,6 +376,7 @@ static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
 		   NULL);
 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
 static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
+static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
 
 static struct attribute *tis_attrs[] = {
 	&dev_attr_pubek.attr,
@@ -364,7 +386,8 @@ static struct attribute *tis_attrs[] = {
 	&dev_attr_owned.attr,
 	&dev_attr_temp_deactivated.attr,
 	&dev_attr_caps.attr,
-	&dev_attr_cancel.attr, NULL,
+	&dev_attr_cancel.attr,
+	&dev_attr_timeouts.attr, NULL,
 };
 
 static struct attribute_group tis_attr_grp = {
@@ -472,6 +495,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
+	if (is_itpm(to_pnp_dev(dev)))
+		itpm = 1;
+
 	if (itpm)
 		dev_info(dev, "Intel iTPM workaround enabled\n");
 
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 0f69c5ec0ec..7dc855b074d 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1314,6 +1314,17 @@ static void control_work_handler(struct work_struct *work)
 	spin_unlock(&portdev->cvq_lock);
 }
 
+static void out_intr(struct virtqueue *vq)
+{
+	struct port *port;
+
+	port = find_port_by_vq(vq->vdev->priv, vq);
+	if (!port)
+		return;
+
+	wake_up_interruptible(&port->waitqueue);
+}
+
 static void in_intr(struct virtqueue *vq)
 {
 	struct port *port;
@@ -1430,7 +1441,7 @@ static int init_vqs(struct ports_device *portdev)
 	 */
 	j = 0;
 	io_callbacks[j] = in_intr;
-	io_callbacks[j + 1] = NULL;
+	io_callbacks[j + 1] = out_intr;
 	io_names[j] = "input";
 	io_names[j + 1] = "output";
 	j += 2;
@@ -1444,7 +1455,7 @@ static int init_vqs(struct ports_device *portdev)
 		for (i = 1; i < nr_ports; i++) {
 			j += 2;
 			io_callbacks[j] = in_intr;
-			io_callbacks[j + 1] = NULL;
+			io_callbacks[j + 1] = out_intr;
 			io_names[j] = "input";
 			io_names[j + 1] = "output";
 		}
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index a5071084337..97df791c74c 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -154,6 +154,45 @@ void cpuidle_resume_and_unlock(void)
 
 EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock);
 
+#ifdef CONFIG_ARCH_HAS_CPU_RELAX
+static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st)
+{
+	ktime_t	t1, t2;
+	s64 diff;
+	int ret;
+
+	t1 = ktime_get();
+	local_irq_enable();
+	while (!need_resched())
+		cpu_relax();
+
+	t2 = ktime_get();
+	diff = ktime_to_us(ktime_sub(t2, t1));
+	if (diff > INT_MAX)
+		diff = INT_MAX;
+
+	ret = (int) diff;
+	return ret;
+}
+
+static void poll_idle_init(struct cpuidle_device *dev)
+{
+	struct cpuidle_state *state = &dev->states[0];
+
+	cpuidle_set_statedata(state, NULL);
+
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
+	snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
+	state->exit_latency = 0;
+	state->target_residency = 0;
+	state->power_usage = -1;
+	state->flags = CPUIDLE_FLAG_POLL;
+	state->enter = poll_idle;
+}
+#else
+static void poll_idle_init(struct cpuidle_device *dev) {}
+#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
+
 /**
  * cpuidle_enable_device - enables idle PM for a CPU
  * @dev: the CPU
@@ -178,6 +217,8 @@ int cpuidle_enable_device(struct cpuidle_device *dev)
 			return ret;
 	}
 
+	poll_idle_init(dev);
+
 	if ((ret = cpuidle_add_state_sysfs(dev)))
 		return ret;
 
@@ -232,45 +273,6 @@ void cpuidle_disable_device(struct cpuidle_device *dev)
 
 EXPORT_SYMBOL_GPL(cpuidle_disable_device);
 
-#ifdef CONFIG_ARCH_HAS_CPU_RELAX
-static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st)
-{
-	ktime_t	t1, t2;
-	s64 diff;
-	int ret;
-
-	t1 = ktime_get();
-	local_irq_enable();
-	while (!need_resched())
-		cpu_relax();
-
-	t2 = ktime_get();
-	diff = ktime_to_us(ktime_sub(t2, t1));
-	if (diff > INT_MAX)
-		diff = INT_MAX;
-
-	ret = (int) diff;
-	return ret;
-}
-
-static void poll_idle_init(struct cpuidle_device *dev)
-{
-	struct cpuidle_state *state = &dev->states[0];
-
-	cpuidle_set_statedata(state, NULL);
-
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
-	snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
-	state->exit_latency = 0;
-	state->target_residency = 0;
-	state->power_usage = -1;
-	state->flags = CPUIDLE_FLAG_POLL;
-	state->enter = poll_idle;
-}
-#else
-static void poll_idle_init(struct cpuidle_device *dev) {}
-#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
-
 /**
  * __cpuidle_register_device - internal register function called before register
  * and enable routines
@@ -291,8 +293,6 @@ static int __cpuidle_register_device(struct cpuidle_device *dev)
 
 	init_completion(&dev->kobj_unregister);
 
-	poll_idle_init(dev);
-
 	/*
 	 * cpuidle driver should set the dev->power_specified bit
 	 * before registering the device if the driver provides
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index be0492398ef..24ff35511e2 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -75,6 +75,8 @@ static size_t config_rom_length = 1 + 4 + 1 + 1;
 #define BIB_IRMC		((1) << 31)
 #define NODE_CAPABILITIES	0x0c0083c0 /* per IEEE 1394 clause 8.3.2.6.5.2 */
 
+#define CANON_OUI		0x000085
+
 static void generate_config_rom(struct fw_card *card, __be32 *config_rom)
 {
 	struct fw_descriptor *desc;
@@ -284,6 +286,7 @@ static void bm_work(struct work_struct *work)
 	bool root_device_is_running;
 	bool root_device_is_cmc;
 	bool irm_is_1394_1995_only;
+	bool keep_this_irm;
 
 	spin_lock_irq(&card->lock);
 
@@ -305,6 +308,10 @@ static void bm_work(struct work_struct *work)
 	irm_is_1394_1995_only = irm_device && irm_device->config_rom &&
 			(irm_device->config_rom[2] & 0x000000f0) == 0;
 
+	/* Canon MV5i works unreliably if it is not root node. */
+	keep_this_irm = irm_device && irm_device->config_rom &&
+			irm_device->config_rom[3] >> 8 == CANON_OUI;
+
 	root_id  = root_node->node_id;
 	irm_id   = card->irm_node->node_id;
 	local_id = card->local_node->node_id;
@@ -333,7 +340,7 @@ static void bm_work(struct work_struct *work)
 			goto pick_me;
 		}
 
-		if (irm_is_1394_1995_only) {
+		if (irm_is_1394_1995_only && !keep_this_irm) {
 			new_root_id = local_id;
 			fw_notify("%s, making local node (%02x) root.\n",
 				  "IRM is not 1394a compliant", new_root_id);
@@ -382,7 +389,7 @@ static void bm_work(struct work_struct *work)
 
 		spin_lock_irq(&card->lock);
 
-		if (rcode != RCODE_COMPLETE) {
+		if (rcode != RCODE_COMPLETE && !keep_this_irm) {
 			/*
 			 * The lock request failed, maybe the IRM
 			 * isn't really IRM capable after all. Let's
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4cab0c6397e..aa17594a674 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -97,7 +97,10 @@ config DRM_I830
 config DRM_I915
 	tristate "i915 driver"
 	depends on AGP_INTEL
+	# we need shmfs for the swappable backing store, and in particular
+	# the shmem_readpage() which depends upon tmpfs
 	select SHMEM
+	select TMPFS
 	select DRM_KMS_HELPER
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index dcbeb98f195..ae9fb7a3afd 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -649,6 +649,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 						      old_fb)) {
 				DRM_ERROR("failed to set mode on [CRTC:%d]\n",
 					  set->crtc->base.id);
+				set->crtc->fb = old_fb;
 				ret = -EINVAL;
 				goto fail;
 			}
@@ -663,8 +664,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 			set->crtc->fb = set->fb;
 		ret = crtc_funcs->mode_set_base(set->crtc,
 						set->x, set->y, old_fb);
-		if (ret != 0)
+		if (ret != 0) {
+			set->crtc->fb = old_fb;
 			goto fail;
+		}
 	}
 
 	kfree(save_connectors);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index c836b886b35..e6fc48ea55a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1419,9 +1419,15 @@ static int i915_load_modeset_init(struct drm_device *dev,
 	if (ret)
 		DRM_INFO("failed to find VBIOS tables\n");
 
-	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
+	/* If we have > 1 VGA cards, then we need to arbitrate access
+	 * to the common VGA resources.
+	 *
+	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
+	 * then we do not take part in VGA arbitration and the
+	 * vga_client_register() fails with -ENODEV.
+	 */
 	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
-	if (ret)
+	if (ret && ret != -ENODEV)
 		goto cleanup_ringbuffer;
 
 	ret = vga_switcheroo_register_client(dev->pdev,
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 6dbe14cc4f7..7792c8f7c6d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -53,7 +53,7 @@ extern int intel_agp_enabled;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
 	.class = PCI_CLASS_DISPLAY_VGA << 8,	\
-	.class_mask = 0xffff00,			\
+	.class_mask = 0xff0000,			\
 	.vendor = 0x8086,			\
 	.device = id,				\
 	.subvendor = PCI_ANY_ID,		\
@@ -414,6 +414,14 @@ int i965_reset(struct drm_device *dev, u8 flags)
 static int __devinit
 i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	/* Only bind to function 0 of the device. Early generations
+	 * used function 1 as a placeholder for multi-head. This causes
+	 * us confusion instead, especially on the systems where both
+	 * functions have the same PCI-ID!
+	 */
+	if (PCI_FUNC(pdev->devfn))
+		return -ENODEV;
+
 	return drm_get_pci_dev(pdev, ent, &driver);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cda89f49b5b..7103d24c821 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2967,10 +2967,11 @@
 #define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_A	(0x01<<22)
 #define  EDP_LINK_TRAIN_800MV_0DB_SNB_A		(0x0<<22)
 /* SNB B-stepping */
-#define  EDP_LINK_TRAIN_400MV_0DB_SNB_B		(0x0<<22)
-#define  EDP_LINK_TRAIN_400MV_6DB_SNB_B		(0x3a<<22)
-#define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_B	(0x39<<22)
-#define  EDP_LINK_TRAIN_800MV_0DB_SNB_B		(0x38<<22)
+#define  EDP_LINK_TRAIN_400_600MV_0DB_SNB_B	(0x0<<22)
+#define  EDP_LINK_TRAIN_400MV_3_5DB_SNB_B	(0x1<<22)
+#define  EDP_LINK_TRAIN_400_600MV_6DB_SNB_B	(0x3a<<22)
+#define  EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B	(0x39<<22)
+#define  EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B	(0x38<<22)
 #define  EDP_LINK_TRAIN_VOL_EMP_MASK_SNB	(0x3f<<22)
 
 #endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f2bcfdf3ec1..0aa77f31879 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1093,18 +1093,27 @@ intel_dp_signal_levels(uint8_t train_set, int lane_count)
 static uint32_t
 intel_gen6_edp_signal_levels(uint8_t train_set)
 {
-	switch (train_set & (DP_TRAIN_VOLTAGE_SWING_MASK|DP_TRAIN_PRE_EMPHASIS_MASK)) {
+	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	switch (signal_levels) {
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
-		return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
-		return EDP_LINK_TRAIN_400MV_6DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
+		return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
 	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return EDP_LINK_TRAIN_600MV_3_5DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
 	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
-		return EDP_LINK_TRAIN_800MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
 	default:
-		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level\n");
-		return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+			      "0x%x\n", signal_levels);
+		return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6ec39a86ed0..c3b2208508f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -701,6 +701,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen i915GMm-HFS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Aopen i945GTt-VFA",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 4e7778d44b8..695de9a3850 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -187,9 +187,9 @@ static int dp_link_clock_for_mode_clock(u8 dpcd[DP_DPCD_SIZE], int mode_clock)
 int dp_mode_valid(u8 dpcd[DP_DPCD_SIZE], int mode_clock)
 {
 	int lanes = dp_lanes_for_mode_clock(dpcd, mode_clock);
-	int bw = dp_lanes_for_mode_clock(dpcd, mode_clock);
+	int dp_clock = dp_link_clock_for_mode_clock(dpcd, mode_clock);
 
-	if ((lanes == 0) || (bw == 0))
+	if ((lanes == 0) || (dp_clock == 0))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 3779265c3b9..85a0d9f1f82 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -313,7 +313,6 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 				     uint16_t *line_mux,
 				     struct radeon_hpd *hpd)
 {
-	struct radeon_device *rdev = dev->dev_private;
 
 	/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
 	if ((dev->pdev->device == 0x791e) &&
@@ -388,6 +387,13 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 			*line_mux = 0x90;
 	}
 
+	/* mac rv630, rv730, others */
+	if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) &&
+	    (*connector_type == DRM_MODE_CONNECTOR_DVII)) {
+		*connector_type = DRM_MODE_CONNECTOR_9PinDIN;
+		*line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1;
+	}
+
 	/* ASUS HD 3600 XT board lists the DVI port as HDMI */
 	if ((dev->pdev->device == 0x9598) &&
 	    (dev->pdev->subsystem_vendor == 0x1043) &&
@@ -425,21 +431,23 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 		}
 	}
 
-	/* Acer laptop reports DVI-D as DVI-I and hpd pins reversed */
+	/* Acer laptop (Acer TravelMate 5730G) has an HDMI port
+	 * on the laptop and a DVI port on the docking station and
+	 * both share the same encoder, hpd pin, and ddc line.
+	 * So while the bios table is technically correct,
+	 * we drop the DVI port here since xrandr has no concept of
+	 * encoders and will try and drive both connectors
+	 * with different crtcs which isn't possible on the hardware
+	 * side and leaves no crtcs for LVDS or VGA.
+	 */
 	if ((dev->pdev->device == 0x95c4) &&
 	    (dev->pdev->subsystem_vendor == 0x1025) &&
 	    (dev->pdev->subsystem_device == 0x013c)) {
-		struct radeon_gpio_rec gpio;
-
 		if ((*connector_type == DRM_MODE_CONNECTOR_DVII) &&
 		    (supported_device == ATOM_DEVICE_DFP1_SUPPORT)) {
-			gpio = radeon_lookup_gpio(rdev, 6);
-			*hpd = radeon_atom_get_hpd_info_from_gpio(rdev, &gpio);
+			/* actually it's a DVI-D port not DVI-I */
 			*connector_type = DRM_MODE_CONNECTOR_DVID;
-		} else if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
-			   (supported_device == ATOM_DEVICE_DFP1_SUPPORT)) {
-			gpio = radeon_lookup_gpio(rdev, 7);
-			*hpd = radeon_atom_get_hpd_info_from_gpio(rdev, &gpio);
+			return false;
 		}
 	}
 
@@ -2295,7 +2303,7 @@ void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
 	bios_2_scratch &= ~ATOM_S2_VRI_BRIGHT_ENABLE;
 
 	/* tell the bios not to handle mode switching */
-	bios_6_scratch |= (ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH | ATOM_S6_ACC_MODE);
+	bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH;
 
 	if (rdev->family >= CHIP_R600) {
 		WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
@@ -2346,10 +2354,13 @@ void radeon_atom_output_lock(struct drm_encoder *encoder, bool lock)
 	else
 		bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
 
-	if (lock)
+	if (lock) {
 		bios_6_scratch |= ATOM_S6_CRITICAL_STATE;
-	else
+		bios_6_scratch &= ~ATOM_S6_ACC_MODE;
+	} else {
 		bios_6_scratch &= ~ATOM_S6_CRITICAL_STATE;
+		bios_6_scratch |= ATOM_S6_ACC_MODE;
+	}
 
 	if (rdev->family >= CHIP_R600)
 		WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index b92d2f2fcbe..4da243ac79d 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -629,6 +629,10 @@ static void radeon_compute_pll_legacy(struct radeon_pll *pll,
 	*frac_fb_div_p = best_frac_feedback_div;
 	*ref_div_p = best_ref_div;
 	*post_div_p = best_post_div;
+	DRM_DEBUG_KMS("%d %d, pll dividers - fb: %d.%d ref: %d, post %d\n",
+		      freq, best_freq / 1000, best_feedback_div, best_frac_feedback_div,
+		      best_ref_div, best_post_div);
+
 }
 
 static bool
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index f366f968155..d7def1790b4 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -636,7 +636,7 @@ int vga_client_register(struct pci_dev *pdev, void *cookie,
 			void (*irq_set_state)(void *cookie, bool state),
 			unsigned int (*set_vga_decode)(void *cookie, bool decode))
 {
-	int ret = -1;
+	int ret = -ENODEV;
 	struct vga_device *vgadev;
 	unsigned long flags;
 
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index b6598aa557a..87a5fd51dd5 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -162,6 +162,10 @@ static const char *temperature_sensors_sets[][41] = {
 /* Set 22: MacBook Pro 7,1 */
 	{ "TB0T", "TB1T", "TB2T", "TC0D", "TC0P", "TN0D", "TN0P", "TN0S",
 	  "TN1D", "TN1F", "TN1G", "TN1S", "Th1H", "Ts0P", "Ts0S", NULL },
+/* Set 23: MacBook Air 3,1 */
+	{ "TB0T", "TB1T", "TB2T", "TC0D", "TC0E", "TC0P", "TC1E", "TCZ3",
+	  "TCZ4", "TCZ5", "TG0E", "TG1E", "TG2E", "TGZ3", "TGZ4", "TGZ5",
+	  "TH0F", "TH0O", "TM0P" },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -444,38 +448,22 @@ static int applesmc_read_motion_sensor(int index, s16* value)
 }
 
 /*
- * applesmc_device_init - initialize the accelerometer.  Returns zero on success
- * and negative error code on failure.  Can sleep.
+ * applesmc_device_init - initialize the accelerometer.  Can sleep.
  */
-static int applesmc_device_init(void)
+static void applesmc_device_init(void)
 {
-	int total, ret = -ENXIO;
+	int total;
 	u8 buffer[2];
 
 	if (!applesmc_accelerometer)
-		return 0;
+		return;
 
 	mutex_lock(&applesmc_lock);
 
 	for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
-		if (debug)
-			printk(KERN_DEBUG "applesmc try %d\n", total);
 		if (!applesmc_read_key(MOTION_SENSOR_KEY, buffer, 2) &&
-				(buffer[0] != 0x00 || buffer[1] != 0x00)) {
-			if (total == INIT_TIMEOUT_MSECS) {
-				printk(KERN_DEBUG "applesmc: device has"
-						" already been initialized"
-						" (0x%02x, 0x%02x).\n",
-						buffer[0], buffer[1]);
-			} else {
-				printk(KERN_DEBUG "applesmc: device"
-						" successfully initialized"
-						" (0x%02x, 0x%02x).\n",
-						buffer[0], buffer[1]);
-			}
-			ret = 0;
+				(buffer[0] != 0x00 || buffer[1] != 0x00))
 			goto out;
-		}
 		buffer[0] = 0xe0;
 		buffer[1] = 0x00;
 		applesmc_write_key(MOTION_SENSOR_KEY, buffer, 2);
@@ -486,7 +474,6 @@ static int applesmc_device_init(void)
 
 out:
 	mutex_unlock(&applesmc_lock);
-	return ret;
 }
 
 /*
@@ -512,13 +499,8 @@ static int applesmc_get_fan_count(void)
 /* Device model stuff */
 static int applesmc_probe(struct platform_device *dev)
 {
-	int ret;
-
-	ret = applesmc_device_init();
-	if (ret)
-		return ret;
+	applesmc_device_init();
 
-	printk(KERN_INFO "applesmc: device successfully initialized.\n");
 	return 0;
 }
 
@@ -535,9 +517,7 @@ static int applesmc_pm_resume(struct device *dev)
 /* Reinitialize device on resume from hibernation */
 static int applesmc_pm_restore(struct device *dev)
 {
-	int ret = applesmc_device_init();
-	if (ret)
-		return ret;
+	applesmc_device_init();
 	return applesmc_pm_resume(dev);
 }
 
@@ -1524,11 +1504,17 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 	{ .accelerometer = 1, .light = 1, .temperature_set = 21 },
 /* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */
 	{ .accelerometer = 1, .light = 1, .temperature_set = 22 },
+/* MacBook Air 3,1: accelerometer, backlight and temperature set 23 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 23 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
  * So we need to put "Apple MacBook Pro" before "Apple MacBook". */
 static __initdata struct dmi_system_id applesmc_whitelist[] = {
+	{ applesmc_dmi_match, "Apple MacBook Air 3", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3") },
+		&applesmc_dmi_data[23]},
 	{ applesmc_dmi_match, "Apple MacBook Air 2", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir2") },
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 776aeb3019d..508cb291f71 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -98,6 +98,9 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
  * value, it uses signed 8-bit values with LSB = 1 degree Celsius.
  * For remote temperature, low and high limits, it uses signed 11-bit values
  * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
+ * For LM64 the actual remote diode temperature is 16 degree Celsius higher
+ * than the register reading. Remote temperature setpoints have to be
+ * adapted accordingly.
  */
 
 #define FAN_FROM_REG(reg)	((reg) == 0xFFFC || (reg) == 0 ? 0 : \
@@ -165,6 +168,8 @@ struct lm63_data {
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
+	int kind;
+	int temp2_offset;
 
 	/* registers values */
 	u8 config, config_fan;
@@ -247,16 +252,34 @@ static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dum
 	return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
 }
 
-static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
-			  char *buf)
+/*
+ * There are 8bit registers for both local(temp1) and remote(temp2) sensor.
+ * For remote sensor registers temp2_offset has to be considered,
+ * for local sensor it must not.
+ * So we need separate 8bit accessors for local and remote sensor.
+ */
+static ssize_t show_local_temp8(struct device *dev,
+				struct device_attribute *devattr,
+				char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct lm63_data *data = lm63_update_device(dev);
 	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index]));
 }
 
-static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy,
-			 const char *buf, size_t count)
+static ssize_t show_remote_temp8(struct device *dev,
+				 struct device_attribute *devattr,
+				 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm63_data *data = lm63_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])
+		       + data->temp2_offset);
+}
+
+static ssize_t set_local_temp8(struct device *dev,
+			       struct device_attribute *dummy,
+			       const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm63_data *data = i2c_get_clientdata(client);
@@ -274,7 +297,8 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct lm63_data *data = lm63_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index]));
+	return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])
+		       + data->temp2_offset);
 }
 
 static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
@@ -294,7 +318,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
 	int nr = attr->index;
 
 	mutex_lock(&data->update_lock);
-	data->temp11[nr] = TEMP11_TO_REG(val);
+	data->temp11[nr] = TEMP11_TO_REG(val - data->temp2_offset);
 	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
 				  data->temp11[nr] >> 8);
 	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
@@ -310,6 +334,7 @@ static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute
 {
 	struct lm63_data *data = lm63_update_device(dev);
 	return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2])
+		       + data->temp2_offset
 		       - TEMP8_FROM_REG(data->temp2_crit_hyst));
 }
 
@@ -324,7 +349,7 @@ static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *
 	long hyst;
 
 	mutex_lock(&data->update_lock);
-	hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
+	hyst = TEMP8_FROM_REG(data->temp8[2]) + data->temp2_offset - val;
 	i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
 				  HYST_TO_REG(hyst));
 	mutex_unlock(&data->update_lock);
@@ -355,16 +380,21 @@ static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
 static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
 static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
 
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
-	set_temp8, 1);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8,
+	set_local_temp8, 1);
 
 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
 	set_temp11, 1);
 static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
 	set_temp11, 2);
-static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2);
+/*
+ * On LM63, temp2_crit can be set only once, which should be job
+ * of the bootloader.
+ */
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_remote_temp8,
+	NULL, 2);
 static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
 	set_temp2_crit_hyst);
 
@@ -479,7 +509,12 @@ static int lm63_probe(struct i2c_client *new_client,
 	data->valid = 0;
 	mutex_init(&data->update_lock);
 
-	/* Initialize the LM63 chip */
+	/* Set the device type */
+	data->kind = id->driver_data;
+	if (data->kind == lm64)
+		data->temp2_offset = 16000;
+
+	/* Initialize chip */
 	lm63_init_client(new_client);
 
 	/* Register sysfs hooks */
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index f397ce7ad59..b2074e3ba2f 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -687,6 +687,13 @@ static int __devexit via686a_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+	int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+	data->fan_div[0] = (reg >> 4) & 0x03;
+	data->fan_div[1] = reg >> 6;
+}
+
 static void __devinit via686a_init_device(struct via686a_data *data)
 {
 	u8 reg;
@@ -700,6 +707,9 @@ static void __devinit via686a_init_device(struct via686a_data *data)
 	via686a_write_value(data, VIA686A_REG_TEMP_MODE,
 			    (reg & ~VIA686A_TEMP_MODE_MASK)
 			    | VIA686A_TEMP_MODE_CONTINUOUS);
+
+	/* Pre-read fan clock divisor values */
+	via686a_update_fan_div(data);
 }
 
 static struct via686a_data *via686a_update_device(struct device *dev)
@@ -751,9 +761,7 @@ static struct via686a_data *via686a_update_device(struct device *dev)
 		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
 		     0xc0) >> 6;
 
-		i = via686a_read_value(data, VIA686A_REG_FANDIV);
-		data->fan_div[0] = (i >> 4) & 0x03;
-		data->fan_div[1] = i >> 6;
+		via686a_update_fan_div(data);
 		data->alarms =
 		    via686a_read_value(data,
 				       VIA686A_REG_ALARM1) |
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index bea4c5021d2..c16a448dfd0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1005,6 +1005,14 @@ static int i2c_do_del_adapter(struct i2c_driver *driver,
 static int __unregister_client(struct device *dev, void *dummy)
 {
 	struct i2c_client *client = i2c_verify_client(dev);
+	if (client && strcmp(client->name, "dummy"))
+		i2c_unregister_device(client);
+	return 0;
+}
+
+static int __unregister_dummy(struct device *dev, void *dummy)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
 	if (client)
 		i2c_unregister_device(client);
 	return 0;
@@ -1059,8 +1067,12 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	mutex_unlock(&adap->userspace_clients_lock);
 
 	/* Detach any active clients. This can't fail, thus we do not
-	   checking the returned value. */
+	 * check the returned value. This is a two-pass process, because
+	 * we can't remove the dummy devices during the first pass: they
+	 * could have been instantiated by real devices wishing to clean
+	 * them up properly, so we give them a chance to do that first. */
 	res = device_for_each_child(&adap->dev, NULL, __unregister_client);
+	res = device_for_each_child(&adap->dev, NULL, __unregister_dummy);
 
 #ifdef CONFIG_I2C_COMPAT
 	class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 32d352a88d5..081d06110e3 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -383,7 +383,7 @@ static void send_flowc(struct c4iw_ep *ep, struct sk_buff *skb)
 					  16)) | FW_WR_FLOWID(ep->hwtid));
 
 	flowc->mnemval[0].mnemonic = FW_FLOWC_MNEM_PFNVFN;
-	flowc->mnemval[0].val = cpu_to_be32(0);
+	flowc->mnemval[0].val = cpu_to_be32(PCI_FUNC(ep->com.dev->rdev.lldi.pdev->devfn) << 8);
 	flowc->mnemval[1].mnemonic = FW_FLOWC_MNEM_CH;
 	flowc->mnemval[1].val = cpu_to_be32(ep->tx_chan);
 	flowc->mnemval[2].mnemonic = FW_FLOWC_MNEM_PORT;
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index b9523176391..ee82851afe3 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -55,6 +55,14 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI	0x0236
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO	0x0237
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS	0x0238
+/* MacbookAir3,2 (unibody), aka wellspring5 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI	0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO	0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS	0x0241
+/* MacbookAir3,1 (unibody), aka wellspring4 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI	0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO	0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS	0x0244
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -80,6 +88,14 @@ static const struct usb_device_id bcm5974_table[] = {
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+	/* MacbookAir3,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+	/* MacbookAir3,1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -234,6 +250,30 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
 		{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+		{ DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+	},
 	{}
 };
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 8c53926eb20..a0730fdd31c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -420,6 +420,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
 		},
 	},
+	{
+		/* Dell Vostro V13 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+		},
+	},
 	{ }
 };
 
@@ -541,6 +548,17 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
 };
 #endif
 
+static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
+	{
+		/* Dell Vostro V13 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+		},
+	},
+	{ }
+};
+
 /*
  * Some Wistron based laptops need us to explicitly enable the 'Dritek
  * keyboard extension' to make their extra keys start generating scancodes.
@@ -893,6 +911,9 @@ static int __init i8042_platform_init(void)
 	if (dmi_check_system(i8042_dmi_nomux_table))
 		i8042_nomux = true;
 
+	if (dmi_check_system(i8042_dmi_notimeout_table))
+		i8042_notimeout = true;
+
 	if (dmi_check_system(i8042_dmi_dritek_table))
 		i8042_dritek = true;
 #endif /* CONFIG_X86 */
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index f5851316048..9e486502c03 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -61,6 +61,10 @@ static bool i8042_noloop;
 module_param_named(noloop, i8042_noloop, bool, 0);
 MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
 
+static bool i8042_notimeout;
+module_param_named(notimeout, i8042_notimeout, bool, 0);
+MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");
+
 #ifdef CONFIG_X86
 static bool i8042_dritek;
 module_param_named(dritek, i8042_dritek, bool, 0);
@@ -503,7 +507,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	} else {
 
 		dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
-		      ((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
+		      ((str & I8042_STR_TIMEOUT && !i8042_notimeout) ? SERIO_TIMEOUT : 0);
 
 		port_no = (str & I8042_STR_AUXDATA) ?
 				I8042_AUX_PORT_NO : I8042_KBD_PORT_NO;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 487ecda90ad..406091f9692 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -33,7 +33,6 @@ struct pgpath {
 	unsigned fail_count;		/* Cumulative failure count */
 
 	struct dm_path path;
-	struct work_struct deactivate_path;
 	struct work_struct activate_path;
 };
 
@@ -116,7 +115,6 @@ static struct workqueue_struct *kmultipathd, *kmpath_handlerd;
 static void process_queued_ios(struct work_struct *work);
 static void trigger_event(struct work_struct *work);
 static void activate_path(struct work_struct *work);
-static void deactivate_path(struct work_struct *work);
 
 
 /*-----------------------------------------------
@@ -129,7 +127,6 @@ static struct pgpath *alloc_pgpath(void)
 
 	if (pgpath) {
 		pgpath->is_active = 1;
-		INIT_WORK(&pgpath->deactivate_path, deactivate_path);
 		INIT_WORK(&pgpath->activate_path, activate_path);
 	}
 
@@ -141,14 +138,6 @@ static void free_pgpath(struct pgpath *pgpath)
 	kfree(pgpath);
 }
 
-static void deactivate_path(struct work_struct *work)
-{
-	struct pgpath *pgpath =
-		container_of(work, struct pgpath, deactivate_path);
-
-	blk_abort_queue(pgpath->path.dev->bdev->bd_disk->queue);
-}
-
 static struct priority_group *alloc_priority_group(void)
 {
 	struct priority_group *pg;
@@ -995,7 +984,6 @@ static int fail_path(struct pgpath *pgpath)
 		      pgpath->path.dev->name, m->nr_valid_paths);
 
 	schedule_work(&m->trigger_event);
-	queue_work(kmultipathd, &pgpath->deactivate_path);
 
 out:
 	spin_unlock_irqrestore(&m->lock, flags);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index ac384b2a6a3..a173db5fc76 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2111,13 +2111,14 @@ static void event_callback(void *context)
 	wake_up(&md->eventq);
 }
 
+/*
+ * Protected by md->suspend_lock obtained by dm_swap_table().
+ */
 static void __set_size(struct mapped_device *md, sector_t size)
 {
 	set_capacity(md->disk, size);
 
-	mutex_lock(&md->bdev->bd_inode->i_mutex);
 	i_size_write(md->bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
-	mutex_unlock(&md->bdev->bd_inode->i_mutex);
 }
 
 /*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4d45012f77b..012859708a1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -220,11 +220,14 @@ static int md_make_request(struct request_queue *q, struct bio *bio)
 	mddev_t *mddev = q->queuedata;
 	int rv;
 	int cpu;
+	unsigned int sectors;
 
-	if (mddev == NULL || mddev->pers == NULL) {
+	if (mddev == NULL || mddev->pers == NULL
+	    || !mddev->ready) {
 		bio_io_error(bio);
 		return 0;
 	}
+	smp_rmb(); /* Ensure implications of  'active' are visible */
 	rcu_read_lock();
 	if (mddev->suspended || mddev->barrier) {
 		DEFINE_WAIT(__wait);
@@ -242,12 +245,16 @@ static int md_make_request(struct request_queue *q, struct bio *bio)
 	atomic_inc(&mddev->active_io);
 	rcu_read_unlock();
 
+	/*
+	 * save the sectors now since our bio can
+	 * go away inside make_request
+	 */
+	sectors = bio_sectors(bio);
 	rv = mddev->pers->make_request(mddev, bio);
 
 	cpu = part_stat_lock();
 	part_stat_inc(cpu, &mddev->gendisk->part0, ios[rw]);
-	part_stat_add(cpu, &mddev->gendisk->part0, sectors[rw],
-		      bio_sectors(bio));
+	part_stat_add(cpu, &mddev->gendisk->part0, sectors[rw], sectors);
 	part_stat_unlock();
 
 	if (atomic_dec_and_test(&mddev->active_io) && mddev->suspended)
@@ -3109,7 +3116,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 		char nm[20];
 		if (rdev->raid_disk < 0)
 			continue;
-		if (rdev->new_raid_disk > mddev->raid_disks)
+		if (rdev->new_raid_disk >= mddev->raid_disks)
 			rdev->new_raid_disk = -1;
 		if (rdev->new_raid_disk == rdev->raid_disk)
 			continue;
@@ -4554,7 +4561,8 @@ int md_run(mddev_t *mddev)
 	mddev->safemode_timer.data = (unsigned long) mddev;
 	mddev->safemode_delay = (200 * HZ)/1000 +1; /* 200 msec delay */
 	mddev->in_sync = 1;
-
+	smp_wmb();
+	mddev->ready = 1;
 	list_for_each_entry(rdev, &mddev->disks, same_set)
 		if (rdev->raid_disk >= 0) {
 			char nm[20];
@@ -4716,6 +4724,7 @@ EXPORT_SYMBOL_GPL(md_stop_writes);
 
 void md_stop(mddev_t *mddev)
 {
+	mddev->ready = 0;
 	mddev->pers->stop(mddev);
 	if (mddev->pers->sync_request && mddev->to_remove == NULL)
 		mddev->to_remove = &md_redundancy_group;
@@ -5150,9 +5159,10 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 		/* set saved_raid_disk if appropriate */
 		if (!mddev->persistent) {
 			if (info->state & (1<<MD_DISK_SYNC)  &&
-			    info->raid_disk < mddev->raid_disks)
+			    info->raid_disk < mddev->raid_disks) {
 				rdev->raid_disk = info->raid_disk;
-			else
+				set_bit(In_sync, &rdev->flags);
+			} else
 				rdev->raid_disk = -1;
 		} else
 			super_types[mddev->major_version].
@@ -6037,7 +6047,8 @@ static int md_thread(void * arg)
 			 || kthread_should_stop(),
 			 thread->timeout);
 
-		if (test_and_clear_bit(THREAD_WAKEUP, &thread->flags))
+		clear_bit(THREAD_WAKEUP, &thread->flags);
+		if (!kthread_should_stop())
 			thread->run(thread->mddev);
 	}
 
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 3931299788d..563ede31d5f 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -149,7 +149,8 @@ struct mddev_s
 						       * are happening, so run/
 						       * takeover/stop are not safe
 						       */
-
+	int				ready; /* See when safe to pass
+						* IO requests down */
 	struct gendisk			*gendisk;
 
 	struct kobject			kobj;
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 5bf4985daed..19448144eb3 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -31,7 +31,6 @@
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
-#include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/io.h>		/* outb, outb_p			*/
@@ -71,27 +70,17 @@ static struct rtrack rtrack_card;
 
 /* local things */
 
-static void sleep_delay(long n)
-{
-	/* Sleep nicely for 'n' uS */
-	int d = n / msecs_to_jiffies(1000);
-	if (!d)
-		udelay(n);
-	else
-		msleep(jiffies_to_msecs(d));
-}
-
 static void rt_decvol(struct rtrack *rt)
 {
 	outb(0x58, rt->io);		/* volume down + sigstr + on	*/
-	sleep_delay(100000);
+	msleep(100);
 	outb(0xd8, rt->io);		/* volume steady + sigstr + on	*/
 }
 
 static void rt_incvol(struct rtrack *rt)
 {
 	outb(0x98, rt->io);		/* volume up + sigstr + on	*/
-	sleep_delay(100000);
+	msleep(100);
 	outb(0xd8, rt->io);		/* volume steady + sigstr + on	*/
 }
 
@@ -120,7 +109,7 @@ static int rt_setvol(struct rtrack *rt, int vol)
 
 	if (vol == 0) {			/* volume = 0 means mute the card */
 		outb(0x48, rt->io);	/* volume down but still "on"	*/
-		sleep_delay(2000000);	/* make sure it's totally down	*/
+		msleep(2000);	/* make sure it's totally down	*/
 		outb(0xd0, rt->io);	/* volume steady, off		*/
 		rt->curvol = 0;		/* track the volume state!	*/
 		mutex_unlock(&rt->lock);
@@ -155,7 +144,7 @@ static void send_0_byte(struct rtrack *rt)
 		outb_p(128+64+16+8+  1, rt->io);  /* on + wr-enable + data low */
 		outb_p(128+64+16+8+2+1, rt->io);  /* clock */
 	}
-	sleep_delay(1000);
+	msleep(1);
 }
 
 static void send_1_byte(struct rtrack *rt)
@@ -169,7 +158,7 @@ static void send_1_byte(struct rtrack *rt)
 		outb_p(128+64+16+8+4+2+1, rt->io); /* clock */
 	}
 
-	sleep_delay(1000);
+	msleep(1);
 }
 
 static int rt_setfreq(struct rtrack *rt, unsigned long freq)
@@ -427,7 +416,7 @@ static int __init rtrack_init(void)
 
 	/* this ensures that the volume is all the way down  */
 	outb(0x48, rt->io);		/* volume down but still "on"	*/
-	sleep_delay(2000000);	/* make sure it's totally down	*/
+	msleep(2000);	/* make sure it's totally down	*/
 	outb(0xc0, rt->io);		/* steady volume, mute card	*/
 
 	return 0;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index e7efb4bffab..6e80376b841 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1621,11 +1621,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input           = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = EM28XX_AMUX_VIDEO2,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = EM28XX_AMUX_VIDEO2,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2860_BOARD_TERRATEC_AV350] = {
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index bac7d62866b..0371bf50224 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -462,7 +462,7 @@ static int __devinit sdh_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev);
+	mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev);
 	if (!mmc) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index c73be284831..67f75c17919 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3503,6 +3503,8 @@ static int atl1_set_ringparam(struct net_device *netdev,
 	struct atl1_rfd_ring rfd_old, rfd_new;
 	struct atl1_rrd_ring rrd_old, rrd_new;
 	struct atl1_ring_header rhdr_old, rhdr_new;
+	struct atl1_smb smb;
+	struct atl1_cmb cmb;
 	int err;
 
 	tpd_old = adapter->tpd_ring;
@@ -3543,11 +3545,19 @@ static int atl1_set_ringparam(struct net_device *netdev,
 		adapter->rrd_ring = rrd_old;
 		adapter->tpd_ring = tpd_old;
 		adapter->ring_header = rhdr_old;
+		/*
+		 * Save SMB and CMB, since atl1_free_ring_resources
+		 * will clear them.
+		 */
+		smb = adapter->smb;
+		cmb = adapter->cmb;
 		atl1_free_ring_resources(adapter);
 		adapter->rfd_ring = rfd_new;
 		adapter->rrd_ring = rrd_new;
 		adapter->tpd_ring = tpd_new;
 		adapter->ring_header = rhdr_new;
+		adapter->smb = smb;
+		adapter->cmb = cmb;
 
 		err = atl1_up(adapter);
 		if (err)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index cce32d43175..52e9ca8de4b 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -651,8 +651,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	fep->mii_timeout = 0;
 	init_completion(&fep->mdio_done);
 
-	/* start a read op */
-	writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
+	/* start a write op */
+	writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
 		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
 		FEC_MMFR_TA | FEC_MMFR_DATA(value),
 		fep->hwp + FEC_MII_DATA);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e32af434cc9..0e7f086d28d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2651,9 +2651,16 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	int rx_buf_len;
 
 	/* Decide whether to use packet split mode or not */
+	/* On by default */
+	adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+
 	/* Do not use packet split if we're in SR-IOV Mode */
-	if (!adapter->num_vfs)
-		adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+	if (adapter->num_vfs)
+		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+
+	/* Disable packet split due to 82599 erratum #45 */
+	if (hw->mac.type == ixgbe_mac_82599EB)
+		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
 
 	/* Set the RX buffer length according to the mode */
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 4598e9d2608..65d3d801a25 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -446,6 +446,20 @@ static void skb_recv_done(struct virtqueue *rvq)
 	}
 }
 
+static void virtnet_napi_enable(struct virtnet_info *vi)
+{
+	napi_enable(&vi->napi);
+
+	/* If all buffers were filled by other side before we napi_enabled, we
+	 * won't get another interrupt, so process any outstanding packets
+	 * now.  virtnet_poll wants re-enable the queue, so we disable here.
+	 * We synchronize against interrupts via NAPI_STATE_SCHED */
+	if (napi_schedule_prep(&vi->napi)) {
+		virtqueue_disable_cb(vi->rvq);
+		__napi_schedule(&vi->napi);
+	}
+}
+
 static void refill_work(struct work_struct *work)
 {
 	struct virtnet_info *vi;
@@ -454,7 +468,7 @@ static void refill_work(struct work_struct *work)
 	vi = container_of(work, struct virtnet_info, refill.work);
 	napi_disable(&vi->napi);
 	still_empty = !try_fill_recv(vi, GFP_KERNEL);
-	napi_enable(&vi->napi);
+	virtnet_napi_enable(vi);
 
 	/* In theory, this can happen: if we don't get any buffers in
 	 * we will *never* try to fill again. */
@@ -638,16 +652,7 @@ static int virtnet_open(struct net_device *dev)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
 
-	napi_enable(&vi->napi);
-
-	/* If all buffers were filled by other side before we napi_enabled, we
-	 * won't get another interrupt, so process any outstanding packets
-	 * now.  virtnet_poll wants re-enable the queue, so we disable here.
-	 * We synchronize against interrupts via NAPI_STATE_SCHED */
-	if (napi_schedule_prep(&vi->napi)) {
-		virtqueue_disable_cb(vi->rvq);
-		__napi_schedule(&vi->napi);
-	}
+	virtnet_napi_enable(vi);
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index fe7418aefc4..d4ee07084c4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -710,10 +710,6 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
 
 	/* Do NF cal only at longer intervals */
 	if (longcal || nfcal_pending) {
-		/* Do periodic PAOffset Cal */
-		ar9002_hw_pa_cal(ah, false);
-		ar9002_hw_olc_temp_compensation(ah);
-
 		/*
 		 * Get the value from the previous NF cal and update
 		 * history buffer.
@@ -728,8 +724,12 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
 			ath9k_hw_loadnf(ah, ah->curchan);
 		}
 
-		if (longcal)
+		if (longcal) {
 			ath9k_hw_start_nfcal(ah, false);
+			/* Do periodic PAOffset Cal */
+			ar9002_hw_pa_cal(ah, false);
+			ar9002_hw_olc_temp_compensation(ah);
+		}
 	}
 
 	return iscaldone;
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index cb90aa8bbab..ab1c50b8326 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -445,9 +445,8 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
 		}
 
 		/* WAR for ASPM system hang */
-		if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
+		if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
 			val |= (AR_WA_BIT6 | AR_WA_BIT7);
-		}
 
 		if (AR_SREV_9285E_20(ah))
 			val |= AR_WA_BIT23;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 0e802ca99bd..5f03c534af6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -22,12 +22,14 @@
 #define COMP_CKSUM_LEN 2
 
 #define AR_CH0_TOP (0x00016288)
-#define AR_CH0_TOP_XPABIASLVL (0x3)
+#define AR_CH0_TOP_XPABIASLVL (0x300)
 #define AR_CH0_TOP_XPABIASLVL_S (8)
 
 #define AR_CH0_THERM (0x00016290)
-#define AR_CH0_THERM_SPARE (0x3f)
-#define AR_CH0_THERM_SPARE_S (0)
+#define AR_CH0_THERM_XPABIASLVL_MSB 0x3
+#define AR_CH0_THERM_XPABIASLVL_MSB_S 0
+#define AR_CH0_THERM_XPASHORT2GND 0x4
+#define AR_CH0_THERM_XPASHORT2GND_S 2
 
 #define AR_SWITCH_TABLE_COM_ALL (0xffff)
 #define AR_SWITCH_TABLE_COM_ALL_S (0)
@@ -995,9 +997,9 @@ static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz)
 static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
 {
 	int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz);
-	REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, (bias & 0x3));
-	REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_SPARE,
-		      ((bias >> 2) & 0x3));
+	REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
+	REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_XPABIASLVL_MSB, bias >> 2);
+	REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_XPASHORT2GND, 1);
 }
 
 static u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e7ab70234b5..852745c2b75 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -177,8 +177,8 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
 
 /* returns delimiter padding required given the packet length */
 #define ATH_AGGR_GET_NDELIM(_len)					\
-	(((((_len) + ATH_AGGR_DELIM_SZ) < ATH_AGGR_MINPLEN) ?           \
-	  (ATH_AGGR_MINPLEN - (_len) - ATH_AGGR_DELIM_SZ) : 0) >> 2)
+       (((_len) >= ATH_AGGR_MINPLEN) ? 0 :                             \
+        DIV_ROUND_UP(ATH_AGGR_MINPLEN - (_len), ATH_AGGR_DELIM_SZ))
 
 #define BAW_WITHIN(_start, _bawsz, _seqno) \
 	((((_seqno) - (_start)) & 4095) < (_bawsz))
@@ -312,7 +312,6 @@ struct ath_rx {
 	u8 rxotherant;
 	u32 *rxlink;
 	unsigned int rxfilter;
-	spinlock_t pcu_lock;
 	spinlock_t rxbuflock;
 	struct list_head rxbuf;
 	struct ath_descdma rxdma;
@@ -557,9 +556,9 @@ struct ath_softc {
 	struct ath_hw *sc_ah;
 	void __iomem *mem;
 	int irq;
-	spinlock_t sc_resetlock;
 	spinlock_t sc_serial_rw;
 	spinlock_t sc_pm_lock;
+	spinlock_t sc_pcu_lock;
 	struct mutex mutex;
 	struct work_struct paprd_work;
 	struct work_struct hw_check_work;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index aba49bfd467..0e9bbb13ba6 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -144,16 +144,36 @@ static void hif_usb_tx_cb(struct urb *urb)
 	case -ENODEV:
 	case -ESHUTDOWN:
 		/*
-		 * The URB has been killed, free the SKBs
-		 * and return.
+		 * The URB has been killed, free the SKBs.
 		 */
 		ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
-		return;
+
+		/*
+		 * If the URBs are being flushed, no need to add this
+		 * URB to the free list.
+		 */
+		spin_lock(&hif_dev->tx.tx_lock);
+		if (hif_dev->tx.flags & HIF_USB_TX_FLUSH) {
+			spin_unlock(&hif_dev->tx.tx_lock);
+			return;
+		}
+		spin_unlock(&hif_dev->tx.tx_lock);
+
+		/*
+		 * In the stop() case, this URB has to be added to
+		 * the free list.
+		 */
+		goto add_free;
 	default:
 		break;
 	}
 
-	/* Check if TX has been stopped */
+	/*
+	 * Check if TX has been stopped, this is needed because
+	 * this CB could have been invoked just after the TX lock
+	 * was released in hif_stop() and kill_urb() hasn't been
+	 * called yet.
+	 */
 	spin_lock(&hif_dev->tx.tx_lock);
 	if (hif_dev->tx.flags & HIF_USB_TX_STOP) {
 		spin_unlock(&hif_dev->tx.tx_lock);
@@ -305,6 +325,7 @@ static void hif_usb_start(void *hif_handle, u8 pipe_id)
 static void hif_usb_stop(void *hif_handle, u8 pipe_id)
 {
 	struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
+	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
@@ -312,6 +333,12 @@ static void hif_usb_stop(void *hif_handle, u8 pipe_id)
 	hif_dev->tx.tx_skb_cnt = 0;
 	hif_dev->tx.flags |= HIF_USB_TX_STOP;
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+
+	/* The pending URBs have to be canceled. */
+	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
+				 &hif_dev->tx.tx_pending, list) {
+		usb_kill_urb(tx_buf->urb);
+	}
 }
 
 static int hif_usb_send(void *hif_handle, u8 pipe_id, struct sk_buff *skb,
@@ -577,6 +604,7 @@ free:
 static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 {
 	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
+	unsigned long flags;
 
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_buf, list) {
@@ -587,6 +615,10 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 		kfree(tx_buf);
 	}
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
+	hif_dev->tx.flags |= HIF_USB_TX_FLUSH;
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
 		usb_kill_urb(tx_buf->urb);
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 2daf97b11c0..30d09389d43 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -62,6 +62,7 @@ struct tx_buf {
 };
 
 #define HIF_USB_TX_STOP  BIT(0)
+#define HIF_USB_TX_FLUSH BIT(1)
 
 struct hif_usb_tx {
 	u8 flags;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 1fc386e5c4a..5250c8dc83e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -387,6 +387,9 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 	else
 		ah->config.ht_enable = 0;
 
+	/* PAPRD needs some more work to be enabled */
+	ah->config.paprd_disable = 1;
+
 	ah->config.rx_intr_mitigation = true;
 	ah->config.pcieSerDesWrite = true;
 
@@ -2264,7 +2267,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		pCap->rx_status_len = sizeof(struct ar9003_rxs);
 		pCap->tx_desc_len = sizeof(struct ar9003_txc);
 		pCap->txs_len = sizeof(struct ar9003_txs);
-		if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
+		if (!ah->config.paprd_disable &&
+		    ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
 			pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
 	} else {
 		pCap->tx_desc_len = sizeof(struct ath_desc);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 399f7c1283c..e58ff11cb85 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -240,6 +240,7 @@ struct ath9k_ops_config {
 	u32 pcie_waen;
 	u8 analog_shiftreg;
 	u8 ht_enable;
+	u8 paprd_disable;
 	u32 ofdm_trig_low;
 	u32 ofdm_trig_high;
 	u32 cck_trig_high;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 79241231c06..2e4724f1c66 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -574,7 +574,6 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	common->debug_mask = ath9k_debug;
 
 	spin_lock_init(&sc->wiphy_lock);
-	spin_lock_init(&sc->sc_resetlock);
 	spin_lock_init(&sc->sc_serial_rw);
 	spin_lock_init(&sc->sc_pm_lock);
 	mutex_init(&sc->mutex);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index bd93a9513f9..9790d3a8653 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -214,7 +214,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	ath9k_hw_set_interrupts(ah, 0);
 	ath_drain_all_txq(sc, false);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
+	spin_lock_bh(&sc->sc_pcu_lock);
 
 	stopped = ath_stoprecv(sc);
 
@@ -233,36 +233,33 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 		  sc->sc_ah->curchan->channel,
 		  channel->center_freq, conf_is_ht40(conf));
 
-	spin_lock_bh(&sc->sc_resetlock);
-
 	r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset channel (%u MHz), "
 			  "reset status %d\n",
 			  channel->center_freq, r);
-		spin_unlock_bh(&sc->sc_resetlock);
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		goto ps_restore;
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to restart recv logic\n");
 		r = -EIO;
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		goto ps_restore;
 	}
 
-	spin_unlock_bh(&sc->rx.pcu_lock);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	ath_cache_conf_rate(sc, &hw->conf);
 	ath_update_txpow(sc);
 	ath9k_hw_set_interrupts(ah, ah->imask);
 
 	if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
-		ath_beacon_config(sc, NULL);
+		if (sc->sc_flags & SC_OP_BEACONS)
+			ath_beacon_config(sc, NULL);
 		ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 		ath_start_ani(common);
 	}
@@ -592,7 +589,7 @@ void ath9k_tasklet(unsigned long data)
 		rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 
 	if (status & rxmask) {
-		spin_lock_bh(&sc->rx.pcu_lock);
+		spin_lock_bh(&sc->sc_pcu_lock);
 
 		/* Check for high priority Rx first */
 		if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
@@ -600,7 +597,7 @@ void ath9k_tasklet(unsigned long data)
 			ath_rx_tasklet(sc, 0, true);
 
 		ath_rx_tasklet(sc, 0, false);
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 	}
 
 	if (status & ATH9K_INT_TX) {
@@ -847,8 +844,7 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	if (!ah->curchan)
 		ah->curchan = ath_get_curchannel(sc, sc->hw);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
-	spin_lock_bh(&sc->sc_resetlock);
+	spin_lock_bh(&sc->sc_pcu_lock);
 	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
@@ -856,16 +852,15 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 			  "reset status %d\n",
 			  channel->center_freq, r);
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath_update_txpow(sc);
 	if (ath_startrecv(sc) != 0) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to restart recv logic\n");
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		return;
 	}
-	spin_unlock_bh(&sc->rx.pcu_lock);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	if (sc->sc_flags & SC_OP_BEACONS)
 		ath_beacon_config(sc, NULL);	/* restart beacons */
@@ -905,7 +900,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 
 	ath_drain_all_txq(sc, false);	/* clear pending tx frames */
 
-	spin_lock_bh(&sc->rx.pcu_lock);
+	spin_lock_bh(&sc->sc_pcu_lock);
 
 	ath_stoprecv(sc);		/* turn off frame recv */
 	ath_flushrecv(sc);		/* flush recv queue */
@@ -913,7 +908,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	if (!ah->curchan)
 		ah->curchan = ath_get_curchannel(sc, hw);
 
-	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
 		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
@@ -921,11 +915,10 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 			  "reset status %d\n",
 			  channel->center_freq, r);
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
 
-	spin_unlock_bh(&sc->rx.pcu_lock);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	ath9k_hw_configpcipowersave(ah, 1, 1);
 	ath9k_ps_restore(sc);
@@ -947,23 +940,21 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	ath9k_hw_set_interrupts(ah, 0);
 	ath_drain_all_txq(sc, retry_tx);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
+	spin_lock_bh(&sc->sc_pcu_lock);
 
 	ath_stoprecv(sc);
 	ath_flushrecv(sc);
 
-	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 	if (r)
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d\n", r);
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0)
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to start recv logic\n");
 
-	spin_unlock_bh(&sc->rx.pcu_lock);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	/*
 	 * We may be doing a reset in response to a request
@@ -1129,19 +1120,16 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 * be followed by initialization of the appropriate bits
 	 * and then setup of the interrupt mask.
 	 */
-	spin_lock_bh(&sc->rx.pcu_lock);
-	spin_lock_bh(&sc->sc_resetlock);
+	spin_lock_bh(&sc->sc_pcu_lock);
 	r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d "
 			  "(freq %u MHz)\n", r,
 			  curchan->center_freq);
-		spin_unlock_bh(&sc->sc_resetlock);
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		goto mutex_unlock;
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	/*
 	 * This is needed only to setup initial state
@@ -1160,10 +1148,10 @@ static int ath9k_start(struct ieee80211_hw *hw)
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to start recv logic\n");
 		r = -EIO;
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		goto mutex_unlock;
 	}
-	spin_unlock_bh(&sc->rx.pcu_lock);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	/* Setup our intr mask. */
 	ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
@@ -1365,22 +1353,26 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	 * before setting the invalid flag. */
 	ath9k_hw_set_interrupts(ah, 0);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
 	if (!(sc->sc_flags & SC_OP_INVALID)) {
 		ath_drain_all_txq(sc, false);
+		spin_lock_bh(&sc->sc_pcu_lock);
 		ath_stoprecv(sc);
 		ath9k_hw_phy_disable(ah);
-	} else
+		spin_unlock_bh(&sc->sc_pcu_lock);
+	} else {
+		spin_lock_bh(&sc->sc_pcu_lock);
 		sc->rx.rxlink = NULL;
-	spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
+	}
 
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1, 1);
 	ath9k_ps_restore(sc);
 
-	/* Finally, put the chip in FULL SLEEP mode */
-	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
+	sc->ps_idle = true;
+	ath9k_set_wiphy_idle(aphy, true);
+	ath_radio_disable(sc, hw);
 
 	sc->sc_flags |= SC_OP_INVALID;
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index b5b651413e7..894ebadbb1d 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -290,6 +290,10 @@ static int ath_pci_resume(struct pci_dev *pdev)
 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
 
+	sc->ps_idle = true;
+	ath9k_set_wiphy_idle(aphy, true);
+	ath_radio_disable(sc, hw);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 685258bf543..912f747593c 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -308,7 +308,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 	struct ath_buf *bf;
 	int error = 0;
 
-	spin_lock_init(&sc->rx.pcu_lock);
+	spin_lock_init(&sc->sc_pcu_lock);
 	sc->sc_flags &= ~SC_OP_RXFLUSH;
 	spin_lock_init(&sc->rx.rxbuflock);
 
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index a5c489ca349..8f00c6c1397 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1160,13 +1160,13 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 		ath_print(common, ATH_DBG_FATAL,
 			  "Failed to stop TX DMA. Resetting hardware!\n");
 
-		spin_lock_bh(&sc->sc_resetlock);
+		spin_lock_bh(&sc->sc_pcu_lock);
 		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 		if (r)
 			ath_print(common, ATH_DBG_FATAL,
 				  "Unable to reset hardware; reset status %d\n",
 				  r);
-		spin_unlock_bh(&sc->sc_resetlock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 	}
 
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 10d7b9b7f06..f735117d8fc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1234,6 +1234,9 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 	/* only Re-enable if diabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
+	/* Re-enable RF_KILL if it occurred */
+	else if (handled & CSR_INT_BIT_RF_KILL)
+		iwl_enable_rfkill_int(priv);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
@@ -1449,6 +1452,9 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	/* only Re-enable if diabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
+	/* Re-enable RF_KILL if it occurred */
+	else if (handled & CSR_INT_BIT_RF_KILL)
+		iwl_enable_rfkill_int(priv);
 }
 
 /* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
@@ -3260,9 +3266,10 @@ static void iwl_mac_stop(struct ieee80211_hw *hw)
 
 	flush_workqueue(priv->workqueue);
 
-	/* enable interrupts again in order to receive rfkill changes */
+	/* User space software may expect getting rfkill changes
+	 * even if interface is down */
 	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(priv);
+	iwl_enable_rfkill_int(priv);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
@@ -4103,14 +4110,14 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * 8. Enable interrupts and read RFKILL state
 	 *********************************************/
 
-	/* enable interrupts if needed: hw bug w/a */
+	/* enable rfkill interrupt: hw bug w/a */
 	pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
 	if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
 		pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
 		pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
 	}
 
-	iwl_enable_interrupts(priv);
+	iwl_enable_rfkill_int(priv);
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index 621abe3c5af..1c6add90b5b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -168,6 +168,12 @@ static inline void iwl_disable_interrupts(struct iwl_priv *priv)
 	IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
 }
 
+static inline void iwl_enable_rfkill_int(struct iwl_priv *priv)
+{
+	IWL_DEBUG_ISR(priv, "Enabling rfkill interrupt\n");
+	iwl_write32(priv, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
+}
+
 static inline void iwl_enable_interrupts(struct iwl_priv *priv)
 {
 	IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 0e937dc0c9c..3d5311330b4 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -618,7 +618,7 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
 	else
 		*burst_possible = false;
 
-	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+	if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
 		*flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
 
 	if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 0aa7bce9e6f..c457d65f81a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2395,6 +2395,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0812, 0x3101), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Qcom */
 	{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c
index f7b68ca6cc9..4ae494bb1d5 100644
--- a/drivers/pci/pci-stub.c
+++ b/drivers/pci/pci-stub.c
@@ -54,6 +54,9 @@ static int __init pci_stub_init(void)
 			subdevice = PCI_ANY_ID, class=0, class_mask=0;
 		int fields;
 
+		if (!strlen(id))
+			continue;
+
 		fields = sscanf(id, "%x:%x:%x:%x:%x:%x",
 				&vendor, &device, &subvendor, &subdevice,
 				&class, &class_mask);
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 4d3b27228a2..c8d26df9f14 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -212,7 +212,7 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 	if (di->rem_capacity > 100)
 		di->rem_capacity = 100;
 
-	if (di->current_uA >= 100L)
+	if (di->current_uA < -100L)
 		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
 					/ (di->current_uA / 100L);
 	else
diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c
index 20c4b952e9b..a74cb0ac3d4 100644
--- a/drivers/power/jz4740-battery.c
+++ b/drivers/power/jz4740-battery.c
@@ -47,6 +47,8 @@ struct jz_battery {
 
 	struct power_supply battery;
 	struct delayed_work work;
+
+	struct mutex lock;
 };
 
 static inline struct jz_battery *psy_to_jz_battery(struct power_supply *psy)
@@ -68,6 +70,8 @@ static long jz_battery_read_voltage(struct jz_battery *battery)
 	unsigned long val;
 	long voltage;
 
+	mutex_lock(&battery->lock);
+
 	INIT_COMPLETION(battery->read_completion);
 
 	enable_irq(battery->irq);
@@ -91,6 +95,8 @@ static long jz_battery_read_voltage(struct jz_battery *battery)
 	battery->cell->disable(battery->pdev);
 	disable_irq(battery->irq);
 
+	mutex_unlock(&battery->lock);
+
 	return voltage;
 }
 
@@ -291,6 +297,7 @@ static int __devinit jz_battery_probe(struct platform_device *pdev)
 	jz_battery->pdev = pdev;
 
 	init_completion(&jz_battery->read_completion);
+	mutex_init(&jz_battery->lock);
 
 	INIT_DELAYED_WORK(&jz_battery->work, jz_battery_work);
 
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 5856167a0c9..dd8242d489b 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,6 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
+#include <linux/pm.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -850,7 +851,7 @@ static void __exit cmos_do_remove(struct device *dev)
 
 #ifdef	CONFIG_PM
 
-static int cmos_suspend(struct device *dev, pm_message_t mesg)
+static int cmos_suspend(struct device *dev)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
 	unsigned char	tmp;
@@ -898,7 +899,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
  */
 static inline int cmos_poweroff(struct device *dev)
 {
-	return cmos_suspend(dev, PMSG_HIBERNATE);
+	return cmos_suspend(dev);
 }
 
 static int cmos_resume(struct device *dev)
@@ -945,9 +946,9 @@ static int cmos_resume(struct device *dev)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume);
+
 #else
-#define	cmos_suspend	NULL
-#define	cmos_resume	NULL
 
 static inline int cmos_poweroff(struct device *dev)
 {
@@ -1077,7 +1078,7 @@ static void __exit cmos_pnp_remove(struct pnp_dev *pnp)
 
 static int cmos_pnp_suspend(struct pnp_dev *pnp, pm_message_t mesg)
 {
-	return cmos_suspend(&pnp->dev, mesg);
+	return cmos_suspend(&pnp->dev);
 }
 
 static int cmos_pnp_resume(struct pnp_dev *pnp)
@@ -1157,8 +1158,9 @@ static struct platform_driver cmos_platform_driver = {
 	.shutdown	= cmos_platform_shutdown,
 	.driver = {
 		.name		= (char *) driver_name,
-		.suspend	= cmos_suspend,
-		.resume		= cmos_resume,
+#ifdef CONFIG_PM
+		.pm		= &cmos_pm_ops,
+#endif
 	}
 };
 
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index f0037eefd44..142af5bc3a4 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -91,6 +91,12 @@ enum qdio_irq_states {
 #define AC1_SC_QEBSM_AVAILABLE		0x02	/* available for subchannel */
 #define AC1_SC_QEBSM_ENABLED		0x01	/* enabled for subchannel */
 
+/* SIGA flags */
+#define QDIO_SIGA_WRITE		0x00
+#define QDIO_SIGA_READ		0x01
+#define QDIO_SIGA_SYNC		0x02
+#define QDIO_SIGA_QEBSM_FLAG	0x80
+
 #ifdef CONFIG_64BIT
 static inline int do_sqbs(u64 token, unsigned char state, int queue,
 			  int *start, int *count)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 00520f9a7a8..1763afcd89e 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -29,11 +29,12 @@ MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\
 MODULE_DESCRIPTION("QDIO base support");
 MODULE_LICENSE("GPL");
 
-static inline int do_siga_sync(struct subchannel_id schid,
-			       unsigned int out_mask, unsigned int in_mask)
+static inline int do_siga_sync(unsigned long schid,
+			       unsigned int out_mask, unsigned int in_mask,
+			       unsigned int fc)
 {
-	register unsigned long __fc asm ("0") = 2;
-	register struct subchannel_id __schid asm ("1") = schid;
+	register unsigned long __fc asm ("0") = fc;
+	register unsigned long __schid asm ("1") = schid;
 	register unsigned long out asm ("2") = out_mask;
 	register unsigned long in asm ("3") = in_mask;
 	int cc;
@@ -47,10 +48,11 @@ static inline int do_siga_sync(struct subchannel_id schid,
 	return cc;
 }
 
-static inline int do_siga_input(struct subchannel_id schid, unsigned int mask)
+static inline int do_siga_input(unsigned long schid, unsigned int mask,
+				unsigned int fc)
 {
-	register unsigned long __fc asm ("0") = 1;
-	register struct subchannel_id __schid asm ("1") = schid;
+	register unsigned long __fc asm ("0") = fc;
+	register unsigned long __schid asm ("1") = schid;
 	register unsigned long __mask asm ("2") = mask;
 	int cc;
 
@@ -279,6 +281,8 @@ void qdio_init_buf_states(struct qdio_irq *irq_ptr)
 static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
 			  unsigned int input)
 {
+	unsigned long schid = *((u32 *) &q->irq_ptr->schid);
+	unsigned int fc = QDIO_SIGA_SYNC;
 	int cc;
 
 	if (!need_siga_sync(q))
@@ -287,7 +291,12 @@ static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
 	DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr);
 	qperf_inc(q, siga_sync);
 
-	cc = do_siga_sync(q->irq_ptr->schid, output, input);
+	if (is_qebsm(q)) {
+		schid = q->irq_ptr->sch_token;
+		fc |= QDIO_SIGA_QEBSM_FLAG;
+	}
+
+	cc = do_siga_sync(schid, output, input, fc);
 	if (cc)
 		DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc);
 	return cc;
@@ -313,8 +322,8 @@ static inline int qdio_siga_sync_all(struct qdio_q *q)
 
 static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit)
 {
-	unsigned long schid;
-	unsigned int fc = 0;
+	unsigned long schid = *((u32 *) &q->irq_ptr->schid);
+	unsigned int fc = QDIO_SIGA_WRITE;
 	u64 start_time = 0;
 	int cc;
 
@@ -323,11 +332,8 @@ static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit)
 
 	if (is_qebsm(q)) {
 		schid = q->irq_ptr->sch_token;
-		fc |= 0x80;
+		fc |= QDIO_SIGA_QEBSM_FLAG;
 	}
-	else
-		schid = *((u32 *)&q->irq_ptr->schid);
-
 again:
 	cc = do_siga_output(schid, q->mask, busy_bit, fc);
 
@@ -347,12 +353,19 @@ again:
 
 static inline int qdio_siga_input(struct qdio_q *q)
 {
+	unsigned long schid = *((u32 *) &q->irq_ptr->schid);
+	unsigned int fc = QDIO_SIGA_READ;
 	int cc;
 
 	DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr);
 	qperf_inc(q, siga_read);
 
-	cc = do_siga_input(q->irq_ptr->schid, q->mask);
+	if (is_qebsm(q)) {
+		schid = q->irq_ptr->sch_token;
+		fc |= QDIO_SIGA_QEBSM_FLAG;
+	}
+
+	cc = do_siga_input(schid, q->mask, fc);
 	if (cc)
 		DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc);
 	return cc;
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index f0cfba9a1fc..baf2b603995 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -649,6 +649,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_splice_init(&shost->eh_cmd_q, &eh_work_q);
+	shost->host_eh_scheduled = 0;
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	SAS_DPRINTK("Enter %s\n", __func__);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 57bcd5c9dcf..9e590265a02 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2057,9 +2057,9 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 		/* adjust hba_queue_depth, reply_free_queue_depth,
 		 * and queue_size
 		 */
-		ioc->hba_queue_depth -= queue_diff;
-		ioc->reply_free_queue_depth -= queue_diff;
-		queue_size -= queue_diff;
+		ioc->hba_queue_depth -= (queue_diff / 2);
+		ioc->reply_free_queue_depth -= (queue_diff / 2);
+		queue_size = facts->MaxReplyDescriptorPostQueueDepth;
 	}
 	ioc->reply_post_queue_depth = queue_size;
 
@@ -3662,6 +3662,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
 	mutex_init(&ioc->scsih_cmds.mutex);
 
+	/* scsih internal command bits */
+	ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
+	mutex_init(&ioc->scsih_cmds.mutex);
+
 	/* task management internal command bits */
 	ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
@@ -3786,6 +3791,8 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
 static void
 _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 {
+	mpt2sas_scsih_reset_handler(ioc, reset_phase);
+	mpt2sas_ctl_reset_handler(ioc, reset_phase);
 	switch (reset_phase) {
 	case MPT2_IOC_PRE_RESET:
 		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
@@ -3816,8 +3823,6 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
 		break;
 	}
-	mpt2sas_scsih_reset_handler(ioc, reset_phase);
-	mpt2sas_ctl_reset_handler(ioc, reset_phase);
 }
 
 /**
@@ -3871,6 +3876,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 {
 	int r;
 	unsigned long flags;
+	u8 pe_complete = ioc->wait_for_port_enable_to_complete;
 
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
@@ -3913,6 +3919,14 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	if (r)
 		goto out;
 	_base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
+
+	/* If this hard reset is called while port enable is active, then
+	 * there is no reason to call make_ioc_operational
+	 */
+	if (pe_complete) {
+		r = -EFAULT;
+		goto out;
+	}
 	r = _base_make_ioc_operational(ioc, sleep_flag);
 	if (!r)
 		_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 16e99b68635..794d927f70c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -819,7 +819,7 @@ _scsih_is_end_device(u32 device_info)
 }
 
 /**
- * mptscsih_get_scsi_lookup - returns scmd entry
+ * _scsih_scsi_lookup_get - returns scmd entry
  * @ioc: per adapter object
  * @smid: system request message index
  *
@@ -832,6 +832,28 @@ _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 }
 
 /**
+ * _scsih_scsi_lookup_get_clear - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ * Then will derefrence the stored scmd pointer.
+ */
+static inline struct scsi_cmnd *
+_scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+	unsigned long flags;
+	struct scsi_cmnd *scmd;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	scmd = ioc->scsi_lookup[smid - 1].scmd;
+	ioc->scsi_lookup[smid - 1].scmd = NULL;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	return scmd;
+}
+
+/**
  * _scsih_scsi_lookup_find_by_scmd - scmd lookup
  * @ioc: per adapter object
  * @smid: system request message index
@@ -2957,9 +2979,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
 	u16 handle;
 
 	for (i = 0 ; i < event_data->NumEntries; i++) {
-		if (event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
-			continue;
 		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
 		if (!handle)
 			continue;
@@ -3186,7 +3205,7 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
 	u16 count = 0;
 
 	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
-		scmd = _scsih_scsi_lookup_get(ioc, smid);
+		scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
 		if (!scmd)
 			continue;
 		count++;
@@ -3778,7 +3797,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	u32 response_code = 0;
 
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	scmd = _scsih_scsi_lookup_get(ioc, smid);
+	scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
 	if (scmd == NULL)
 		return 1;
 
@@ -4940,6 +4959,12 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
 		     event_data);
 #endif
 
+	/* In MPI Revision K (0xC), the internal device reset complete was
+	 * implemented, so avoid setting tm_busy flag for older firmware.
+	 */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xC)
+		return;
+
 	if (event_data->ReasonCode !=
 	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
 	   event_data->ReasonCode !=
@@ -5034,6 +5059,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
     struct fw_event_work *fw_event)
 {
 	struct scsi_cmnd *scmd;
+	struct scsi_device *sdev;
 	u16 smid, handle;
 	u32 lun;
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -5044,12 +5070,17 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
 	Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
 #endif
 	u16 ioc_status;
+	unsigned long flags;
+	int r;
+
 	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
 	    "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
 	    event_data->PortWidth));
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	ioc->broadcast_aen_busy = 0;
 	termination_count = 0;
 	query_count = 0;
 	mpi_reply = ioc->tm_cmds.reply;
@@ -5057,7 +5088,8 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
 		scmd = _scsih_scsi_lookup_get(ioc, smid);
 		if (!scmd)
 			continue;
-		sas_device_priv_data = scmd->device->hostdata;
+		sdev = scmd->device;
+		sas_device_priv_data = sdev->hostdata;
 		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
 			continue;
 		 /* skip hidden raid components */
@@ -5073,6 +5105,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
 		lun = sas_device_priv_data->lun;
 		query_count++;
 
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 		mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
 		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, NULL);
 		ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
@@ -5082,14 +5115,20 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
 		    (mpi_reply->ResponseCode ==
 		     MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
 		     mpi_reply->ResponseCode ==
-		     MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+		     MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) {
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 			continue;
-
-		mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
-		    MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30, NULL);
+		}
+		r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
+		    sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
+		    scmd);
+		if (r == FAILED)
+			sdev_printk(KERN_WARNING, sdev, "task abort: FAILED "
+			    "scmd(%p)\n", scmd);
 		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	}
-	ioc->broadcast_aen_busy = 0;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
 	    "%s - exit, query_count = %d termination_count = %d\n",
@@ -6685,6 +6724,7 @@ _scsih_remove(struct pci_dev *pdev)
 		destroy_workqueue(wq);
 
 	/* release all the volumes */
+	_scsih_ir_shutdown(ioc);
 	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
 	    list) {
 		if (raid_device->starget) {
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0eb0af56db9..c52273c1327 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1153,6 +1153,12 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 	u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
 	u64 bad_lba;
 	int info_valid;
+	/*
+	 * resid is optional but mostly filled in.  When it's unused,
+	 * its value is zero, so we assume the whole buffer transferred
+	 */
+	unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
+	unsigned int good_bytes;
 
 	if (scmd->request->cmd_type != REQ_TYPE_FS)
 		return 0;
@@ -1186,7 +1192,8 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 	/* This computation should always be done in terms of
 	 * the resolution of the device's medium.
 	 */
-	return (bad_lba - start_lba) * scmd->device->sector_size;
+	good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
+	return min(good_bytes, transferred);
 }
 
 /**
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 24110f6f61e..c9e86deba5e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -241,7 +241,8 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+		/* UART_CAP_EFR breaks billionon CF bluetooth card. */
+		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
 	[PORT_16654] = {
 		.name		= "ST16654",
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index 526682d68de..17053a5eb25 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -734,7 +734,7 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 
 	/* Fetch the vendor specific tuples. */
 	res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
-				ssb_pcmcia_do_get_invariants, sprom);
+				ssb_pcmcia_do_get_invariants, iv);
 	if ((res == 0) || (res == -ENOSPC))
 		return 0;
 
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index 8b383ee959b..5c6c7274416 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -54,6 +54,7 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 
 #define PCI_VENDOR_ID_JR3 0x1762
 #define PCI_DEVICE_ID_JR3_1_CHANNEL 0x3111
+#define PCI_DEVICE_ID_JR3_1_CHANNEL_NEW 0x1111
 #define PCI_DEVICE_ID_JR3_2_CHANNEL 0x3112
 #define PCI_DEVICE_ID_JR3_3_CHANNEL 0x3113
 #define PCI_DEVICE_ID_JR3_4_CHANNEL 0x3114
@@ -73,6 +74,8 @@ static DEFINE_PCI_DEVICE_TABLE(jr3_pci_pci_table) = {
 	{
 	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL,
 		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
+	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL_NEW,
+		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_2_CHANNEL,
 		    PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_3_CHANNEL,
@@ -807,6 +810,10 @@ static int jr3_pci_attach(struct comedi_device *dev,
 					devpriv->n_channels = 1;
 				}
 				break;
+			case PCI_DEVICE_ID_JR3_1_CHANNEL_NEW:{
+					devpriv->n_channels = 1;
+				}
+				break;
 			case PCI_DEVICE_ID_JR3_2_CHANNEL:{
 					devpriv->n_channels = 2;
 				}
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3acf7e62bec..681312d1911 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -572,7 +572,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 	/* grab our IRQ */
 	if (irq) {
 		isr_flags = 0;
-		if (thisboard->bustype == pci_bustype)
+		if (thisboard->bustype == pci_bustype
+		    || thisboard->bustype == pcmcia_bustype)
 			isr_flags |= IRQF_SHARED;
 		if (request_irq(irq, labpc_interrupt, isr_flags,
 				driver_labpc.driver_name, dev)) {
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index ff1d24720f1..26d3677755d 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -369,6 +369,7 @@ static int blkvsc_probe(struct device *device)
 		blkdev->gd->first_minor = 0;
 	blkdev->gd->fops = &block_ops;
 	blkdev->gd->private_data = blkdev;
+	blkdev->gd->driverfs_dev = &(blkdev->device_ctx->device);
 	sprintf(blkdev->gd->disk_name, "hd%c", 'a' + devnum);
 
 	blkvsc_do_inquiry(blkdev);
diff --git a/drivers/staging/hv/netvsc.c b/drivers/staging/hv/netvsc.c
index 1d2ebbe17e2..95dee473d81 100644
--- a/drivers/staging/hv/netvsc.c
+++ b/drivers/staging/hv/netvsc.c
@@ -1250,7 +1250,7 @@ static void NetVscOnChannelCallback(void *Context)
 	/* ASSERT(device); */
 
 	packet = kzalloc(NETVSC_PACKET_SIZE * sizeof(unsigned char),
-			 GFP_KERNEL);
+			 GFP_ATOMIC);
 	if (!packet)
 		return;
 	buffer = packet;
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 64a01147eca..d2d5608b5eb 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -233,6 +233,7 @@ static void netvsc_linkstatus_callback(struct hv_device *device_obj,
 	if (status == 1) {
 		netif_carrier_on(net);
 		netif_wake_queue(net);
+		netif_notify_peers(net);
 	} else {
 		netif_carrier_off(net);
 		netif_stop_queue(net);
diff --git a/drivers/staging/rt2860/chips/rt3090.c b/drivers/staging/rt2860/chips/rt3090.c
index c2933c69bc0..cbc59f8a7c2 100644
--- a/drivers/staging/rt2860/chips/rt3090.c
+++ b/drivers/staging/rt2860/chips/rt3090.c
@@ -51,7 +51,8 @@ void NICInitRT3090RFRegisters(struct rt_rtmp_adapter *pAd)
 	if (IS_RT3090(pAd)) {
 		/* Init RF calibration */
 		/* Driver should toggle RF R30 bit7 before init RF registers */
-		u32 RfReg = 0, data;
+		u8 RfReg;
+		u32 data;
 
 		RT30xxReadRFRegister(pAd, RF_R30, (u8 *)&RfReg);
 		RfReg |= 0x80;
diff --git a/drivers/staging/rt2860/chips/rt30xx.c b/drivers/staging/rt2860/chips/rt30xx.c
index 4367a196aef..88eba5192ed 100644
--- a/drivers/staging/rt2860/chips/rt30xx.c
+++ b/drivers/staging/rt2860/chips/rt30xx.c
@@ -53,7 +53,7 @@ struct rt_reg_pair RT30xx_RFRegTable[] = {
 	,
 	{RF_R06, 0x02}
 	,
-	{RF_R07, 0x70}
+	{RF_R07, 0x60}
 	,
 	{RF_R09, 0x0F}
 	,
@@ -441,7 +441,7 @@ void RT30xxReverseRFSleepModeSetup(struct rt_rtmp_adapter *pAd)
 
 		/* VCO_IC, RF R7 register Bit 4 & Bit 5 to 1 */
 		RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
-		RFValue |= 0x30;
+		RFValue |= 0x20;
 		RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
 
 		/* Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1 */
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index ad60ceaf4b8..caf8b7623cb 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -483,8 +483,6 @@ struct net_device *RtmpPhyNetDevInit(struct rt_rtmp_adapter *pAd,
 	net_dev->ml_priv = (void *)pAd;
 	pAd->net_dev = net_dev;
 
-	netif_stop_queue(net_dev);
-
 	return net_dev;
 
 }
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index cd15daae541..aca0c468fa6 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -106,6 +106,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x0411, 0x016f)},	/* MelCo.,Inc. WLI-UC-G301N */
 	{USB_DEVICE(0x1737, 0x0070)},	/* Linksys WUSB100 */
 	{USB_DEVICE(0x1737, 0x0071)},	/* Linksys WUSB600N */
+	{USB_DEVICE(0x1737, 0x0078)},	/* Linksys WUSB100v2 */
 	{USB_DEVICE(0x0411, 0x00e8)},	/* Buffalo WLI-UC-G300N */
 	{USB_DEVICE(0x050d, 0x815c)},	/* Belkin F5D8053 */
 	{USB_DEVICE(0x100D, 0x9031)},	/* Motorola 2770 */
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index 832608d3e57..08bd26a245d 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -799,20 +799,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		spin_unlock_irqrestore(&vdev->priv_lock, flags2);
 	}
 
-
-	if (!vdev->ud.tcp_socket) {
-		/* tcp connection is closed */
-		usbip_uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n",
-									urb);
-
-		usb_hcd_unlink_urb_from_ep(hcd, urb);
-
-		spin_unlock_irqrestore(&the_controller->lock, flags);
-		usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
-								urb->status);
-		spin_lock_irqsave(&the_controller->lock, flags);
-	}
-
 	spin_unlock_irqrestore(&the_controller->lock, flags);
 
 	usbip_dbg_vhci_hc("leave\n");
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 722c840ac63..7e89383599e 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -235,6 +235,7 @@ static int zram_read(struct zram *zram, struct bio *bio)
 
 		if (zram_test_flag(zram, index, ZRAM_ZERO)) {
 			handle_zero_page(page);
+			index++;
 			continue;
 		}
 
@@ -243,12 +244,14 @@ static int zram_read(struct zram *zram, struct bio *bio)
 			pr_debug("Read before write: sector=%lu, size=%u",
 				(ulong)(bio->bi_sector), bio->bi_size);
 			/* Do nothing */
+			index++;
 			continue;
 		}
 
 		/* Page is stored uncompressed since it's incompressible */
 		if (unlikely(zram_test_flag(zram, index, ZRAM_UNCOMPRESSED))) {
 			handle_uncompressed_page(zram, page, index);
+			index++;
 			continue;
 		}
 
@@ -324,6 +327,7 @@ static int zram_write(struct zram *zram, struct bio *bio)
 			mutex_unlock(&zram->lock);
 			zram_stat_inc(&zram->stats.pages_zero);
 			zram_set_flag(zram, index, ZRAM_ZERO);
+			index++;
 			continue;
 		}
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index bc62fae0680..3ffa4347760 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
 	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 5cca00a6d09..b5c965c031f 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1945,7 +1945,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	dev_dbg(&rhdev->dev, "usb %s%s\n",
 			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
-	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (!hcd->driver->bus_resume)
 		return -ENOENT;
 	if (hcd->state == HC_STATE_RUNNING)
@@ -1953,6 +1952,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	hcd->state = HC_STATE_RESUMING;
 	status = hcd->driver->bus_resume(hcd);
+	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (status == 0) {
 		/* TRSMRCY = 10 msec */
 		msleep(10);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 566c1833f16..6c16c4f2c74 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -677,6 +677,8 @@ static void hub_init_func3(struct work_struct *ws);
 static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
 	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
 	int port1;
 	int status;
 	bool need_debounce_delay = false;
@@ -715,6 +717,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			usb_autopm_get_interface_no_resume(
 					to_usb_interface(hub->intfdev));
 			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev, "Host not "
+							"accepting hub info "
+							"update.\n");
+					dev_err(hub->intfdev, "LS/FS devices "
+							"and hubs may not work "
+							"under this hub\n.");
+				}
+			}
+			hub_power_on(hub, true);
 		} else {
 			hub_power_on(hub, true);
 		}
@@ -2722,6 +2743,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->ttport = hdev->ttport;
 	} else if (udev->speed != USB_SPEED_HIGH
 			&& hdev->speed == USB_SPEED_HIGH) {
+		if (!hub->tt.hub) {
+			dev_err(&udev->dev, "parent hub has no TT\n");
+			retval = -EINVAL;
+			goto fail;
+		}
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index cf241c371a7..15222ebf342 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget;
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
 
-static ushort __initdata idVendor;
+static ushort idVendor;
 module_param(idVendor, ushort, S_IRUGO);
 MODULE_PARM_DESC(idVendor, "USB Vendor ID");
 
-static ushort __initdata idProduct;
+static ushort idProduct;
 module_param(idProduct, ushort, S_IRUGO);
 MODULE_PARM_DESC(idProduct, "USB Product ID");
 
-static ushort __initdata bcdDevice;
+static ushort bcdDevice;
 module_param(bcdDevice, ushort, S_IRUGO);
 MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
 
-static char *__initdata iManufacturer;
+static char *iManufacturer;
 module_param(iManufacturer, charp, S_IRUGO);
 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
 
-static char *__initdata iProduct;
+static char *iProduct;
 module_param(iProduct, charp, S_IRUGO);
 MODULE_PARM_DESC(iProduct, "USB Product string");
 
-static char *__initdata iSerialNum;
+static char *iSerialNum;
 module_param(iSerialNum, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNum, "1");
 
-static char *__initdata iPNPstring;
+static char *iPNPstring;
 module_param(iPNPstring, charp, S_IRUGO);
 MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
 
@@ -1596,13 +1596,12 @@ cleanup(void)
 	int status;
 
 	mutex_lock(&usb_printer_gadget.lock_printer_io);
-	class_destroy(usb_gadget_class);
-	unregister_chrdev_region(g_printer_devno, 2);
-
 	status = usb_gadget_unregister_driver(&printer_driver);
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
+	unregister_chrdev_region(g_printer_devno, 2);
+	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 2baf8a84908..a869e3c103d 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 	 * mark HW unaccessible.  The PM and USB cores make sure that
 	 * the root hub is either suspended or stopped.
 	 */
-	spin_lock_irqsave(&ehci->lock, flags);
 	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+	spin_lock_irqsave(&ehci->lock, flags);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d453ea66a21..c0a3a37de35 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -114,6 +114,9 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
 
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
+/* for ASPM quirk of ISOC on AMD SB800 */
+static struct pci_dev *amd_nb_dev;
+
 /*-------------------------------------------------------------------------*/
 
 #include "ehci.h"
@@ -514,6 +517,11 @@ static void ehci_stop (struct usb_hcd *hcd)
 	spin_unlock_irq (&ehci->lock);
 	ehci_mem_cleanup (ehci);
 
+	if (amd_nb_dev) {
+		pci_dev_put(amd_nb_dev);
+		amd_nb_dev = NULL;
+	}
+
 #ifdef	EHCI_STATS
 	ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
 		ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
@@ -549,6 +557,8 @@ static int ehci_init(struct usb_hcd *hcd)
 	ehci->iaa_watchdog.function = ehci_iaa_watchdog;
 	ehci->iaa_watchdog.data = (unsigned long) ehci;
 
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
 	/*
 	 * hw default: 1K periodic list heads, one per frame.
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
@@ -556,11 +566,20 @@ static int ehci_init(struct usb_hcd *hcd)
 	ehci->periodic_size = DEFAULT_I_TDPS;
 	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	INIT_LIST_HEAD(&ehci->cached_sitd_list);
+
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		switch (EHCI_TUNE_FLS) {
+		case 0: ehci->periodic_size = 1024; break;
+		case 1: ehci->periodic_size = 512; break;
+		case 2: ehci->periodic_size = 256; break;
+		default:	BUG();
+		}
+	}
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 
 	/* controllers may cache some of the periodic schedule ... */
-	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
 	if (HCC_ISOC_CACHE(hcc_params))		// full frame cache
 		ehci->i_thresh = 2 + 8;
 	else					// N microframes cached
@@ -614,12 +633,6 @@ static int ehci_init(struct usb_hcd *hcd)
 		/* periodic schedule size can be smaller than default */
 		temp &= ~(3 << 2);
 		temp |= (EHCI_TUNE_FLS << 2);
-		switch (EHCI_TUNE_FLS) {
-		case 0: ehci->periodic_size = 1024; break;
-		case 1: ehci->periodic_size = 512; break;
-		case 2: ehci->periodic_size = 256; break;
-		default:	BUG();
-		}
 	}
 	if (HCC_LPM(hcc_params)) {
 		/* support link power management EHCI 1.1 addendum */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 796ea0c8900..8a515f0d598 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 {
 	int		port;
 	u32		temp;
+	unsigned long	flags;
 
 	/* If remote wakeup is enabled for the root hub but disabled
 	 * for the controller, we must adjust all the port wakeup flags
@@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
 		return;
 
+	spin_lock_irqsave(&ehci->lock, flags);
+
 	/* clear phy low-power mode before changing wakeup flags */
 	if (ehci->has_hostpc) {
 		port = HCS_N_PORTS(ehci->hcs_params);
@@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 			temp = ehci_readl(ehci, hostpc_reg);
 			ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
 		}
+		spin_unlock_irqrestore(&ehci->lock, flags);
 		msleep(5);
+		spin_lock_irqsave(&ehci->lock, flags);
 	}
 
 	port = HCS_N_PORTS(ehci->hcs_params);
@@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	/* Does the root hub have a port wakeup pending? */
 	if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
 		usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
 }
 
 static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 8d24d1c5e6a..566791e04e8 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -41,6 +41,42 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
+static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci)
+{
+	struct pci_dev *amd_smbus_dev;
+	u8 rev = 0;
+
+	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (amd_smbus_dev) {
+		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+		if (rev < 0x40) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+			return 0;
+		}
+	} else {
+		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL);
+		if (!amd_smbus_dev)
+			return 0;
+		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+		if (rev < 0x11 || rev > 0x18) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+			return 0;
+		}
+	}
+
+	if (!amd_nb_dev)
+		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+
+	ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n");
+
+	pci_dev_put(amd_smbus_dev);
+	amd_smbus_dev = NULL;
+
+	return 1;
+}
+
 /* called during probe() after chip reset completes */
 static int ehci_pci_setup(struct usb_hcd *hcd)
 {
@@ -99,6 +135,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
+	if (ehci_quirk_amd_hudson(ehci))
+		ehci->amd_l1_fix = 1;
+
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -308,8 +347,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * mark HW unaccessible.  The PM and USB cores make sure that
 	 * the root hub is either suspended or stopped.
 	 */
-	spin_lock_irqsave (&ehci->lock, flags);
 	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+	spin_lock_irqsave (&ehci->lock, flags);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d6e5a..724ba7133c4 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1583,6 +1583,63 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
 	*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
 }
 
+#define AB_REG_BAR_LOW 0xe0
+#define AB_REG_BAR_HIGH 0xe1
+#define AB_INDX(addr) ((addr) + 0x00)
+#define AB_DATA(addr) ((addr) + 0x04)
+#define NB_PCIE_INDX_ADDR 0xe0
+#define NB_PCIE_INDX_DATA 0xe4
+#define NB_PIF0_PWRDOWN_0 0x01100012
+#define NB_PIF0_PWRDOWN_1 0x01100013
+
+static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable)
+{
+	u32 addr, addr_low, addr_high, val;
+
+	outb_p(AB_REG_BAR_LOW, 0xcd6);
+	addr_low = inb_p(0xcd7);
+	outb_p(AB_REG_BAR_HIGH, 0xcd6);
+	addr_high = inb_p(0xcd7);
+	addr = addr_high << 8 | addr_low;
+	outl_p(0x30, AB_INDX(addr));
+	outl_p(0x40, AB_DATA(addr));
+	outl_p(0x34, AB_INDX(addr));
+	val = inl_p(AB_DATA(addr));
+
+	if (disable) {
+		val &= ~0x8;
+		val |= (1 << 4) | (1 << 9);
+	} else {
+		val |= 0x8;
+		val &= ~((1 << 4) | (1 << 9));
+	}
+	outl_p(val, AB_DATA(addr));
+
+	if (amd_nb_dev) {
+		addr = NB_PIF0_PWRDOWN_0;
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+
+		addr = NB_PIF0_PWRDOWN_1;
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+	}
+
+	return;
+}
+
 /* fit urb's itds into the selected schedule slot; activate as needed */
 static int
 itd_link_urb (
@@ -1609,6 +1666,12 @@ itd_link_urb (
 			urb->interval,
 			next_uframe >> 3, next_uframe & 0x7);
 	}
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 1);
+	}
+
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill iTDs uframe by uframe */
@@ -1733,6 +1796,11 @@ itd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 0);
+	}
+
 	if (unlikely(list_is_singular(&stream->td_list))) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
@@ -2018,6 +2086,12 @@ sitd_link_urb (
 			(next_uframe >> 3) & (ehci->periodic_size - 1),
 			stream->interval, hc32_to_cpu(ehci, stream->splits));
 	}
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 1);
+	}
+
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill sITDs frame by frame */
@@ -2118,6 +2192,11 @@ sitd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 0);
+	}
+
 	if (list_is_singular(&stream->td_list)) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f704e..fd1c53da89e 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -130,6 +130,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
+	unsigned		amd_l1_fix:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 
 	/* required for usb32 quirk */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f3d5222cfc0..96ef552cfeb 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -508,9 +508,10 @@ void xhci_stop(struct usb_hcd *hcd)
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	xhci_reset(xhci);
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	xhci_cleanup_msix(xhci);
+
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	/* Tell the event ring poll function not to reschedule */
 	xhci->zombie = 1;
@@ -544,9 +545,10 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	xhci_cleanup_msix(xhci);
+
 	xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
 		    xhci_readl(xhci, &xhci->op_regs->status));
 }
@@ -2166,8 +2168,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		xhci_err(xhci, "Error while assigning device slot ID\n");
 		return 0;
 	}
-	/* xhci_alloc_virt_device() does not touch rings; no need to lock */
-	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+	/* xhci_alloc_virt_device() does not touch rings; no need to lock.
+	 * Use GFP_NOIO, since this function can be called from
+	 * xhci_discover_or_reset_device(), which may be called as part of
+	 * mass storage driver error handling.
+	 */
+	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
 		/* Disable slot, if we can do it without mem alloc */
 		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
 		spin_lock_irqsave(&xhci->lock, flags);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 63f7cc45bca..7b8815ddf36 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb)
 	if (actual_length >= 4) {
 		struct ch341_private *priv = usb_get_serial_port_data(port);
 		unsigned long flags;
+		u8 prev_line_status = priv->line_status;
 
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
 		if ((data[1] & CH341_MULT_STAT))
 			priv->multi_status_change = 1;
 		spin_unlock_irqrestore(&priv->lock, flags);
+
+		if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
+			struct tty_struct *tty = tty_port_tty_get(&port->port);
+			if (tty)
+				usb_serial_handle_dcd_change(port, tty,
+					    priv->line_status & CH341_BIT_DCD);
+			tty_kref_put(tty);
+		}
+
 		wake_up_interruptible(&priv->delta_msr_wait);
 	}
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8d7731dbf47..735ea03157a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
-static int cp210x_carrier_raised(struct usb_serial_port *p);
 
 static int debug;
 
@@ -87,7 +86,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
-	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
@@ -110,7 +108,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
@@ -165,8 +165,7 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
-	.dtr_rts		= cp210x_dtr_rts,
-	.carrier_raised		= cp210x_carrier_raised
+	.dtr_rts		= cp210x_dtr_rts
 };
 
 /* Config request types */
@@ -765,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int cp210x_carrier_raised(struct usb_serial_port *p)
-{
-	unsigned int control;
-	cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
-	if (control & CONTROL_DCD)
-		return 1;
-	return 0;
-}
-
 static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b92070c103c..666e5a6edd8 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
-static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
@@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.open =				digi_open,
 	.close =			digi_close,
 	.dtr_rts =			digi_dtr_rts,
-	.carrier_raised =		digi_carrier_raised,
 	.write =			digi_write,
 	.write_room =			digi_write_room,
 	.write_bulk_callback = 		digi_write_bulk_callback,
@@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on)
 	digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
 }
 
-static int digi_carrier_raised(struct usb_serial_port *port)
-{
-	struct digi_port *priv = usb_get_serial_port_data(port);
-	if (priv->dp_modem_signals & TIOCM_CD)
-		return 1;
-	return 0;
-}
-
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 62ff9009783..88bef027687 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -99,6 +99,7 @@ struct ftdi_sio_quirk {
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
+static int   ftdi_stmclite_probe(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -122,6 +123,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 	.port_probe = ftdi_HE_TIRA1_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+	.probe	= ftdi_stmclite_probe,
+};
+
 /*
  * The 8U232AM has the same API as the sio except for:
  * - it can support MUCH higher baudrates; up to:
@@ -615,6 +620,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
 	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+	{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
 	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -675,7 +681,17 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
-	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
@@ -799,6 +815,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1680,6 +1698,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 }
 
 /*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+	struct usb_interface *interface = serial->interface;
+
+	dbg("%s", __func__);
+
+	if (interface == udev->actconfig->interface[2])
+		return 0;
+
+	dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+	return -ENODEV;
+}
+
+/*
  * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
  * We have to correct it if we want to read from it.
  */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 77ace17fd14..3523df534a2 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -518,6 +518,12 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Acton Research Corp.
+ */
+#define ACTON_VID		0x0647	/* Vendor ID */
+#define ACTON_SPECTRAPRO_PID	0x0100
+
+/*
  * Contec products (http://www.contec.com)
  * Submitted by Daniel Sangorrin
  */
@@ -569,11 +575,23 @@
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
 /*
- * Icom ID-1 digital transceiver
+ * Definitions for Icom Inc. devices
  */
-
-#define ICOM_ID1_VID            0x0C26
-#define ICOM_ID1_PID            0x0004
+#define ICOM_VID		0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID		0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID	0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID	0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID	0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID	0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID	0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID	0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID	0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID	0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID	0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID	0x0013 /* ID-RP2000V Receive config port */
 
 /*
  * GN Otometrics (http://www.otometrics.com)
@@ -1022,6 +1040,12 @@
 #define WHT_PID			0x0004 /* Wireless Handheld Terminal */
 
 /*
+ * STMicroelectonics
+ */
+#define ST_VID			0x0483
+#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
  * Papouch products (http://www.papouch.com/)
  * Submitted by Folkert van Heusden
  */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index e6833e216fc..e4db5ad2bc5 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port)
 }
 EXPORT_SYMBOL_GPL(usb_serial_handle_break);
 
+/**
+ *	usb_serial_handle_dcd_change - handle a change of carrier detect state
+ *	@port: usb_serial_port structure for the open port
+ *	@tty: tty_struct structure for the port
+ *	@status: new carrier detect status, nonzero if active
+ */
+void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+				struct tty_struct *tty, unsigned int status)
+{
+	struct tty_port *port = &usb_port->port;
+
+	dbg("%s - port %d, status %d", __func__, usb_port->number, status);
+
+	if (status)
+		wake_up_interruptible(&port->open_wait);
+	else if (tty && !C_CLOCAL(tty))
+		tty_hangup(tty);
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change);
+
 int usb_serial_generic_resume(struct usb_serial *serial)
 {
 	struct usb_serial_port *port;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 76e6fb3aab7..db0e3fe4acf 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2894,8 +2894,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 
 	dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
 
-	edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
-	edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
+	edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+	edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
 	edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
 
 	for (rec = ihex_next_binrec(rec); rec;
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index feb56a4ca79..1021a2c1c92 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -196,6 +196,7 @@ static struct usb_serial_driver epic_device = {
 		.name		= "epic",
 	},
 	.description		= "EPiC device",
+	.usb_driver		= &io_driver,
 	.id_table		= Epic_port_id_table,
 	.num_ports		= 1,
 	.open			= edge_open,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index efc72113216..7d26e355872 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1276,6 +1276,7 @@ static struct usb_serial_driver iuu_device = {
 		   .name = "iuu_phoenix",
 		   },
 	.id_table = id_table,
+	.usb_driver = &iuu_driver,
 	.num_ports = 1,
 	.bulk_in_size = 512,
 	.bulk_out_size = 512,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index bf3297ddd18..1ab6ea8c460 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = {
 		.name		= "keyspan_no_firm",
 	},
 	.description		= "Keyspan - (without firmware)",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_pre_ids,
 	.num_ports		= 1,
 	.attach			= keyspan_fake_startup,
@@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 		.name		= "keyspan_1",
 	},
 	.description		= "Keyspan 1 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_1port_ids,
 	.num_ports		= 1,
 	.open			= keyspan_open,
@@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 		.name		= "keyspan_2",
 	},
 	.description		= "Keyspan 2 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_2port_ids,
 	.num_ports		= 2,
 	.open			= keyspan_open,
@@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 		.name		= "keyspan_4",
 	},
 	.description		= "Keyspan 4 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_4port_ids,
 	.num_ports		= 4,
 	.open			= keyspan_open,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 185fe9a7d4e..2cbd661a92f 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -680,22 +680,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
 	}
 }
 
-static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	unsigned char modembits;
-
-	/* If we can read the modem status and the DCD is low then
-	   carrier is not raised yet */
-	if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
-		if (!(modembits & (1>>6)))
-			return 0;
-	}
-	/* Carrier raised, or we failed (eg disconnected) so
-	   progress accordingly */
-	return 1;
-}
-
 
 static int keyspan_pda_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
@@ -882,7 +866,6 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.id_table =		id_table_std,
 	.num_ports =		1,
 	.dtr_rts =		keyspan_pda_dtr_rts,
-	.carrier_raised	=	keyspan_pda_carrier_raised,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,
 	.write =		keyspan_pda_write,
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index cf1718394e1..653465f61d4 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = {
 		.name =		"moto-modem",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&moto_driver,
 	.num_ports =		1,
 };
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 12d5f82616a..0dbcf124689 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb);
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
 
-#define CINTERION_VENDOR_ID			0x0681
+/* Cinterion (formerly Siemens) products */
+#define SIEMENS_VENDOR_ID				0x0681
+#define CINTERION_VENDOR_ID				0x1e2d
+#define CINTERION_PRODUCT_HC25_MDM		0x0047
+#define CINTERION_PRODUCT_HC25_MDMNET	0x0040
+#define CINTERION_PRODUCT_HC28_MDM		0x004C
+#define CINTERION_PRODUCT_HC28_MDMNET	0x004A /* same for HC28J */
+#define CINTERION_PRODUCT_EU3_E			0x0051
+#define CINTERION_PRODUCT_EU3_P			0x0052
+#define CINTERION_PRODUCT_PH8			0x0053
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -939,7 +948,17 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
-	{ USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+	/* Cinterion */
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ } /* Terminating entry */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e199b0f4f99..1c46a863295 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = {
 		.name =		"oti6858",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&oti6858_driver,
 	.num_ports =		1,
 	.open =			oti6858_open,
 	.close =		oti6858_close,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 8ae4c6cbc38..08c9181b8e4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -677,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 {
 
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
 	unsigned long flags;
 	u8 status_idx = UART_STATE;
 	u8 length = UART_STATE + 1;
+	u8 prev_line_status;
 	u16 idv, idp;
 
 	idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
@@ -701,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 
 	/* Save off the uart status for others to look at */
 	spin_lock_irqsave(&priv->lock, flags);
+	prev_line_status = priv->line_status;
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (priv->line_status & UART_BREAK_ERROR)
 		usb_serial_handle_break(port);
 	wake_up_interruptible(&priv->delta_msr_wait);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+	if ((priv->line_status ^ prev_line_status) & UART_DCD)
+		usb_serial_handle_dcd_change(port, tty,
+				priv->line_status & UART_DCD);
+	tty_kref_put(tty);
 }
 
 static void pl2303_read_int_callback(struct urb *urb)
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 43eb9bdad42..1b025f75daf 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -21,6 +21,7 @@
 #define PL2303_PRODUCT_ID_MMX		0x0612
 #define PL2303_PRODUCT_ID_GPRS		0x0609
 #define PL2303_PRODUCT_ID_HCR331	0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA	0x0307
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 214a3e50429..30b73e68a90 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+#define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
 #define CMOTECH_VENDOR_ID			0x16d8
@@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -84,6 +86,7 @@ static struct usb_serial_driver qcaux_device = {
 		.name =		"qcaux",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&qcaux_driver,
 	.num_ports =		1,
 };
 
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index cb8195cabfd..74cd4ccdb3f 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = {
 		.name =		"siemens_mpi",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&siemens_usb_mpi_driver,
 	.num_ports =		1,
 };
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 329d311a35d..f88bc511da6 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg {
 
 /* how come ??? */
 #define UART_STATE			0x08
-#define UART_STATE_TRANSIENT_MASK	0x74
+#define UART_STATE_TRANSIENT_MASK	0x75
 #define UART_DCD			0x01
 #define UART_DSR			0x02
 #define UART_BREAK_ERROR		0x04
@@ -526,6 +526,10 @@ static void spcp8x5_process_read_urb(struct urb *urb)
 		/* overrun is special, not associated with a char */
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+		if (status & UART_DCD)
+			usb_serial_handle_dcd_change(port, tty,
+				   priv->line_status & MSR_STATUS_LINE_DCD);
 	}
 
 	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
@@ -646,6 +650,7 @@ static struct usb_serial_driver spcp8x5_device = {
 		.name =		"SPCP8x5",
 	},
 	.id_table		= id_table,
+	.usb_driver		= &spcp8x5_driver,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 90979a1f531..c58ef543473 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -365,9 +365,9 @@ failed_1port:
 
 static void __exit ti_exit(void)
 {
+	usb_deregister(&ti_usb_driver);
 	usb_serial_deregister(&ti_1port_device);
 	usb_serial_deregister(&ti_2port_device);
-	usb_deregister(&ti_usb_driver);
 }
 
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b993e8dd295..6afd8e84811 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1332,11 +1332,15 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
-	if (driver->usb_driver)
-		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;
+	if (!driver->usb_driver) {
+		WARN(1, "Serial driver %s has no usb_driver\n",
+				driver->description);
+		return -EINVAL;
+	}
+	driver->usb_driver->supports_autosuspend = 1;
 
 	/* Add this device to our list of devices */
 	mutex_lock(&table_lock);
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index f2ed6a31be7..95a82148ee8 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = {
 		.name =		"debug",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&debug_driver,
 	.num_ports =		1,
 	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 44be6d75dab..fba2824085b 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,4 +31,9 @@ UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
 		"Cypress ISD-300LP",
 		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
 
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999,
+		"Super Top",
+		"USB 2.0  SATA BRIDGE",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
 #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index b51b121ae82..b0c0a33910e 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1043,6 +1043,15 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
+/* Reported by <ttkspam@free.fr>
+ * The device reports a vendor-specific device class, requiring an
+ * explicit vendor/product match.
+ */
+UNUSUAL_DEV(  0x0851, 0x1542, 0x0002, 0x0002,
+		"MagicPixel",
+		"FW_Omega2",
+		US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
+
 /* Andrew Lunn <andrew@lunn.ch>
  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
  * on LUN 4.
@@ -1387,6 +1396,13 @@ UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+		"VTech",
+		"Kidizoom",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
@@ -1866,6 +1882,22 @@ UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_BAD_SENSE ),
 
+/* Patch by Richard Sch�tz <r.schtz@t-online.de>
+ * This external hard drive enclosure uses a JMicron chip which
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
+		"TrekStor GmbH & Co. KG",
+		"DataStation maxi g.u",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+		"Coby Electronics",
+		"MP3 Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 38ffc3fbcbe..c06c667e9ca 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -21,7 +21,7 @@
 #define MAX_BRIGHTNESS		(0xFF)
 #define MIN_BRIGHTNESS		(0)
 
-#define CURRENT_MASK		(0x1F << 1)
+#define CURRENT_BITMASK		(0x1F << 1)
 
 struct pm860x_backlight_data {
 	struct pm860x_chip *chip;
@@ -85,7 +85,7 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 	if ((data->current_brightness == 0) && brightness) {
 		if (data->iset) {
 			ret = pm860x_set_bits(data->i2c, wled_idc(data->port),
-					      CURRENT_MASK, data->iset);
+					      CURRENT_BITMASK, data->iset);
 			if (ret < 0)
 				goto out;
 		}
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index ef8d9d558fc..4fb5b2bf234 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -96,11 +96,6 @@ static struct pci_device_id virtio_pci_id_table[] = {
 
 MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
 
-/* A PCI device has it's own struct device and so does a virtio device so
- * we create a place for the virtio devices to show up in sysfs.  I think it
- * would make more sense for virtio to not insist on having it's own device. */
-static struct device *virtio_pci_root;
-
 /* Convert a generic virtio device to our structure */
 static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
 {
@@ -629,7 +624,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
 	if (vp_dev == NULL)
 		return -ENOMEM;
 
-	vp_dev->vdev.dev.parent = virtio_pci_root;
+	vp_dev->vdev.dev.parent = &pci_dev->dev;
 	vp_dev->vdev.dev.release = virtio_pci_release_dev;
 	vp_dev->vdev.config = &virtio_pci_config_ops;
 	vp_dev->pci_dev = pci_dev;
@@ -717,17 +712,7 @@ static struct pci_driver virtio_pci_driver = {
 
 static int __init virtio_pci_init(void)
 {
-	int err;
-
-	virtio_pci_root = root_device_register("virtio-pci");
-	if (IS_ERR(virtio_pci_root))
-		return PTR_ERR(virtio_pci_root);
-
-	err = pci_register_driver(&virtio_pci_driver);
-	if (err)
-		root_device_unregister(virtio_pci_root);
-
-	return err;
+	return pci_register_driver(&virtio_pci_driver);
 }
 
 module_init(virtio_pci_init);
@@ -735,7 +720,6 @@ module_init(virtio_pci_init);
 static void __exit virtio_pci_exit(void)
 {
 	pci_unregister_driver(&virtio_pci_driver);
-	root_device_unregister(virtio_pci_root);
 }
 
 module_exit(virtio_pci_exit);
author	Nicolas Pitre <nicolas.pitre@linaro.org>	2011-02-18 14:46:19 -0500
committer	Nicolas Pitre <nicolas.pitre@linaro.org>	2011-02-18 14:46:19 -0500
commit	c49f87aa34f7fa4850b8838a945475e4062bad61 (patch)
tree	e2d8af4d57671aa35798c1ddca503974ba40fff0 /drivers
parent	a12fc999485eb5d9ecad74554f0baac9688d28e2 (diff)
parent	69ad303ab8321656d6144d13b2444a5595bb6581 (diff)