Merge remote-tracking branch 'gpio/for-next'

8 files changed, 71 insertions, 30 deletions

diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index b80606de545a..f59c43b6411b 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -21,8 +21,8 @@ exact way to do it depends on the GPIO controller providing the GPIOs, see the
 device tree bindings for your controller.
 
 GPIOs mappings are defined in the consumer device's node, in a property named
-<function>-gpios, where <function> is the function the driver will request
-through gpiod_get(). For example:
+either <function>-gpios or <function>-gpio, where <function> is the function
+the driver will request through gpiod_get(). For example:
 
 	foo_device {
 		compatible = "acme,foo";
@@ -31,7 +31,7 @@ through gpiod_get(). For example:
 			    <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
 			    <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
 
-		power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
 	};
 
 This property will make GPIOs 15, 16 and 17 available to the driver under the
@@ -39,15 +39,24 @@ This property will make GPIOs 15, 16 and 17 available to the driver under the
 
 	struct gpio_desc *red, *green, *blue, *power;
 
-	red = gpiod_get_index(dev, "led", 0);
-	green = gpiod_get_index(dev, "led", 1);
-	blue = gpiod_get_index(dev, "led", 2);
+	red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+	green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+	blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
 
-	power = gpiod_get(dev, "power");
+	power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
 
 The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
 gpiod_is_active_low(power) will be true).
 
+The second parameter of the gpiod_get() functions, the con_id string, has to be
+the <function>-prefix of the GPIO suffixes ("gpios" or "gpio", automatically
+looked up by the gpiod functions internally) used in the device tree. With above
+"led-gpios" example, use the prefix without the "-" as con_id parameter: "led".
+
+Internally, the GPIO subsystem prefixes the GPIO suffix ("gpios" or "gpio")
+with the string passed in con_id to get the resulting string
+(snprintf(... "%s-%s", con_id, gpio_suffixes[]).
+
 ACPI
 ----
 ACPI also supports function names for GPIOs in a similar fashion to DT.
@@ -142,13 +151,14 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
 	struct gpio_desc *red, *green, *blue, *power;
 
-	red = gpiod_get_index(dev, "led", 0);
-	green = gpiod_get_index(dev, "led", 1);
-	blue = gpiod_get_index(dev, "led", 2);
+	red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+	green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+	blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
 
-	power = gpiod_get(dev, "power");
-	gpiod_direction_output(power, 1);
+	power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
 
-Since the "power" GPIO is mapped as active-low, its actual signal will be 0
-after this code. Contrary to the legacy integer GPIO interface, the active-low
-property is handled during mapping and is thus transparent to GPIO consumers.
+Since the "led" GPIOs are mapped as active-high, this example will switch their
+signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
+as active-low, its actual signal will be 0 after this code. Contrary to the legacy
+integer GPIO interface, the active-low property is handled during mapping and is
+thus transparent to GPIO consumers.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index a206639454ab..e000502fde20 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -39,6 +39,9 @@ device that displays digits), an additional index argument can be specified:
 					  const char *con_id, unsigned int idx,
 					  enum gpiod_flags flags)
 
+For a more detailed description of the con_id parameter in the DeviceTree case
+see Documentation/gpio/board.txt
+
 The flags parameter is used to optionally specify a direction and initial value
 for the GPIO. Values can be:
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b4fc9e4d24c6..8949b3f6f74d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -356,7 +356,7 @@ config GPIO_PXA
 
 config GPIO_RCAR
 	tristate "Renesas R-Car GPIO"
-	depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index b752b560126e..8813abab9736 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -339,13 +339,15 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 	return 0;
 }
 
-static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
+static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
 				    port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
 	gc->private = port;
 
 	ct = gc->chip_types;
@@ -360,6 +362,8 @@ static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
+
+	return 0;
 }
 
 static void mxc_gpio_get_hw(struct platform_device *pdev)
@@ -477,12 +481,16 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* gpio-mxc can be a generic irq chip */
-	mxc_gpio_init_gc(port, irq_base);
+	err = mxc_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
 
 	list_add_tail(&port->node, &mxc_gpio_ports);
 
 	return 0;
 
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
 out_irqdesc_free:
 	irq_free_descs(irq_base, 32);
 out_gpiochip_remove:
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index b7f383eb18d9..1387385e6697 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -196,13 +196,16 @@ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
 	return 0;
 }
 
-static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
+static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 {
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
 				    port->base, handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+
 	gc->private = port;
 
 	ct = gc->chip_types;
@@ -216,6 +219,8 @@ static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
+
+	return 0;
 }
 
 static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
@@ -317,7 +322,9 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* gpio-mxs can be a generic irq chip */
-	mxs_gpio_init_gc(port, irq_base);
+	err = mxs_gpio_init_gc(port, irq_base);
+	if (err < 0)
+		goto out_irqdomain_remove;
 
 	/* setup one handler for each entry */
 	irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
@@ -343,6 +350,8 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 
 out_bgpio_remove:
 	bgpio_remove(&port->bgc);
+out_irqdomain_remove:
+	irq_domain_remove(port->domain);
 out_irqdesc_free:
 	irq_free_descs(irq_base, 32);
 	return err;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2ae0d47e9554..072af5239bc1 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1098,7 +1098,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 	} else {
 		bank->chip.label = "gpio";
 		bank->chip.base = gpio;
-		gpio += bank->width;
 	}
 	bank->chip.ngpio = bank->width;
 
@@ -1108,6 +1107,9 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 		return ret;
 	}
 
+	if (!bank->is_mpuio)
+		gpio += bank->width;
+
 #ifdef CONFIG_ARCH_OMAP1
 	/*
 	 * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
@@ -1253,8 +1255,11 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	omap_gpio_mod_init(bank);
 
 	ret = omap_gpio_chip_init(bank, irqc);
-	if (ret)
+	if (ret) {
+		pm_runtime_put_sync(bank->dev);
+		pm_runtime_disable(bank->dev);
 		return ret;
+	}
 
 	omap_gpio_show_rev(bank);
 
diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
index 458d9d7952b8..9c6b96707c9f 100644
--- a/drivers/gpio/gpio-sx150x.c
+++ b/drivers/gpio/gpio-sx150x.c
@@ -706,4 +706,3 @@ module_exit(sx150x_exit);
 MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
 MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:sx150x");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 980c1f87866a..5db3445552b1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1174,15 +1174,16 @@ EXPORT_SYMBOL_GPL(gpiod_is_active_low);
  * that the GPIO was actually requested.
  */
 
-static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
+static int _gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	struct gpio_chip	*chip;
-	bool value;
 	int offset;
+	int value;
 
 	chip = desc->chip;
 	offset = gpio_chip_hwgpio(desc);
-	value = chip->get ? chip->get(chip, offset) : false;
+	value = chip->get ? chip->get(chip, offset) : -EIO;
+	value = value < 0 ? value : !!value;
 	trace_gpio_value(desc_to_gpio(desc), 1, value);
 	return value;
 }
@@ -1192,7 +1193,7 @@ static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
@@ -1212,7 +1213,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
  *
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
@@ -1226,6 +1227,9 @@ int gpiod_get_value(const struct gpio_desc *desc)
 	WARN_ON(desc->chip->can_sleep);
 
 	value = _gpiod_get_raw_value(desc);
+	if (value < 0)
+		return value;
+
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;
 
@@ -1548,7 +1552,7 @@ EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
  */
@@ -1566,7 +1570,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
  * @desc: gpio whose value will be returned
  *
  * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
  *
  * This function is to be called from contexts that can sleep.
  */
@@ -1579,6 +1583,9 @@ int gpiod_get_value_cansleep(const struct gpio_desc *desc)
 		return 0;
 
 	value = _gpiod_get_raw_value(desc);
+	if (value < 0)
+		return value;
+
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;