Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-next

Alex writes:
This is the radeon drm-next request.  Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes

[airlied: fix up a bunch of conflicts from drm_order removal]

* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
  drm/radeon/dpm: make sure dc performance level limits are valid (CI)
  drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
  drm/radeon: gcc fixes for extended dpm tables
  drm/radeon: gcc fixes for kb/kv dpm
  drm/radeon: gcc fixes for ci dpm
  drm/radeon: gcc fixes for si dpm
  drm/radeon: gcc fixes for ni dpm
  drm/radeon: gcc fixes for trinity dpm
  drm/radeon: gcc fixes for sumo dpm
  drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
  drm/radeon: gcc fixes for rv6xx dpm
  drm/radeon: gcc fixes for radeon_atombios.c
  drm/radeon: enable UVD interrupts on CIK
  drm/radeon: fix init ordering for r600+
  drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
  drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
  drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
  radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
  drm/radeon/audio: set up the sads on DCE3.2 asics
  drm/radeon: fix handling of variable sized arrays for router objects
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem_dmabuf.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/radeon/cik.c
	drivers/gpu/drm/radeon/ni.c
	drivers/gpu/drm/radeon/r600.c

1 files changed, 146 insertions, 4 deletions

diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index f48240bb8c56..f443010ce90b 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -226,10 +226,29 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	u32 base_rate = 24000;
+	u32 max_ratio = clock / base_rate;
+	u32 dto_phase;
+	u32 dto_modulo = clock;
+	u32 wallclock_ratio;
+	u32 dto_cntl;
 
 	if (!dig || !dig->afmt)
 		return;
 
+	if (max_ratio >= 8) {
+		dto_phase = 192 * 1000;
+		wallclock_ratio = 3;
+	} else if (max_ratio >= 4) {
+		dto_phase = 96 * 1000;
+		wallclock_ratio = 2;
+	} else if (max_ratio >= 2) {
+		dto_phase = 48 * 1000;
+		wallclock_ratio = 1;
+	} else {
+		dto_phase = 24 * 1000;
+		wallclock_ratio = 0;
+	}
+
 	/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
 	 * doesn't matter which one you use.  Just use the first one.
 	 */
@@ -242,9 +261,21 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 		/* according to the reg specs, this should DCE3.2 only, but in
 		 * practice it seems to cover DCE3.0 as well.
 		 */
-		WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
-		WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
-		WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+		if (dig->dig_encoder == 0) {
+			dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+			dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+			WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl);
+			WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
+			WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo);
+			WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+		} else {
+			dto_cntl = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+			dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+			WREG32(DCCG_AUDIO_DTO1_CNTL, dto_cntl);
+			WREG32(DCCG_AUDIO_DTO1_PHASE, dto_phase);
+			WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo);
+			WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
+		}
 	} else {
 		/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
 		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
@@ -252,6 +283,107 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	}
 }
 
+static void dce3_2_afmt_write_speaker_allocation(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector = NULL;
+	u32 tmp;
+	u8 *sadb;
+	int sad_count;
+
+	list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
+		if (connector->encoder == encoder)
+			radeon_connector = to_radeon_connector(connector);
+	}
+
+	if (!radeon_connector) {
+		DRM_ERROR("Couldn't find encoder's connector\n");
+		return;
+	}
+
+	sad_count = drm_edid_to_speaker_allocation(radeon_connector->edid, &sadb);
+	if (sad_count < 0) {
+		DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
+		return;
+	}
+
+	/* program the speaker allocation */
+	tmp = RREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER);
+	tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK);
+	/* set HDMI mode */
+	tmp |= HDMI_CONNECTION;
+	if (sad_count)
+		tmp |= SPEAKER_ALLOCATION(sadb[0]);
+	else
+		tmp |= SPEAKER_ALLOCATION(5); /* stereo */
+	WREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp);
+
+	kfree(sadb);
+}
+
+static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector = NULL;
+	struct cea_sad *sads;
+	int i, sad_count;
+
+	static const u16 eld_reg_to_type[][2] = {
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR0, HDMI_AUDIO_CODING_TYPE_PCM },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR1, HDMI_AUDIO_CODING_TYPE_AC3 },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR2, HDMI_AUDIO_CODING_TYPE_MPEG1 },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR3, HDMI_AUDIO_CODING_TYPE_MP3 },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR4, HDMI_AUDIO_CODING_TYPE_MPEG2 },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR5, HDMI_AUDIO_CODING_TYPE_AAC_LC },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR6, HDMI_AUDIO_CODING_TYPE_DTS },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR7, HDMI_AUDIO_CODING_TYPE_ATRAC },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR9, HDMI_AUDIO_CODING_TYPE_EAC3 },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR10, HDMI_AUDIO_CODING_TYPE_DTS_HD },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR11, HDMI_AUDIO_CODING_TYPE_MLP },
+		{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR13, HDMI_AUDIO_CODING_TYPE_WMA_PRO },
+	};
+
+	list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
+		if (connector->encoder == encoder)
+			radeon_connector = to_radeon_connector(connector);
+	}
+
+	if (!radeon_connector) {
+		DRM_ERROR("Couldn't find encoder's connector\n");
+		return;
+	}
+
+	sad_count = drm_edid_to_sad(radeon_connector->edid, &sads);
+	if (sad_count < 0) {
+		DRM_ERROR("Couldn't read SADs: %d\n", sad_count);
+		return;
+	}
+	BUG_ON(!sads);
+
+	for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) {
+		u32 value = 0;
+		int j;
+
+		for (j = 0; j < sad_count; j++) {
+			struct cea_sad *sad = &sads[j];
+
+			if (sad->format == eld_reg_to_type[i][1]) {
+				value = MAX_CHANNELS(sad->channels) |
+					DESCRIPTOR_BYTE_2(sad->byte2) |
+					SUPPORTED_FREQUENCIES(sad->freq);
+				if (sad->format == HDMI_AUDIO_CODING_TYPE_PCM)
+					value |= SUPPORTED_FREQUENCIES_STEREO(sad->freq);
+				break;
+			}
+		}
+		WREG32(eld_reg_to_type[i][0], value);
+	}
+
+	kfree(sads);
+}
+
 /*
  * update the info frames with the data from the current display mode
  */
@@ -296,6 +428,11 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 		       HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
 	}
 
+	if (ASIC_IS_DCE32(rdev)) {
+		dce3_2_afmt_write_speaker_allocation(encoder);
+		dce3_2_afmt_write_sad_regs(encoder);
+	}
+
 	WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
 	       HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */
 	       HDMI0_ACR_SOURCE); /* select SW CTS value */
@@ -351,7 +488,7 @@ void r600_hdmi_update_audio_settings(struct drm_encoder *encoder)
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	struct r600_audio audio = r600_audio_status(rdev);
+	struct r600_audio_pin audio = r600_audio_status(rdev);
 	uint8_t buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AUDIO_INFOFRAME_SIZE];
 	struct hdmi_audio_infoframe frame;
 	uint32_t offset;
@@ -460,6 +597,11 @@ void r600_hdmi_enable(struct drm_encoder *encoder, bool enable)
 	if (!enable && !dig->afmt->enabled)
 		return;
 
+	if (enable)
+		dig->afmt->pin = r600_audio_get_pin(rdev);
+	else
+		dig->afmt->pin = NULL;
+
 	/* Older chipsets require setting HDMI and routing manually */
 	if (!ASIC_IS_DCE3(rdev)) {
 		if (enable)