aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-proximity-as39358
-rw-r--r--Documentation/devicetree/bindings/iio/proximity/as3935.txt5
-rw-r--r--drivers/iio/adc/Kconfig2
-rw-r--r--drivers/iio/adc/at91-sama5d2_adc.c45
-rw-r--r--drivers/iio/dummy/iio_simple_dummy_events.c1
-rw-r--r--drivers/iio/pressure/zpa2326.c10
-rw-r--r--drivers/iio/proximity/as3935.c43
-rw-r--r--drivers/staging/iio/meter/ade7759.c2
-rw-r--r--drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c19
9 files changed, 96 insertions, 39 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 33e96f740639..147d4e8a1403 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -14,3 +14,11 @@ Description:
Show or set the gain boost of the amp, from 0-31 range.
18 = indoors (default)
14 = outdoors
+
+What /sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date: May 2017
+KernelVersion: 4.13
+Contact: Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+ When 1 the noise level is over the trip level and not reporting
+ valid data
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index 38d74314b7ab..b6c1afa6f02d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -16,6 +16,10 @@ Optional properties:
- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
value 0 - 120pF. This will require using the calibration data from
the manufacturer.
+ - ams,nflwdth: Set the noise and watchdog threshold register on
+ startup. This will need to set according to the noise from the
+ MCU board, and possibly the local environment. Refer to the
+ datasheet for the threshold settings.
Example:
@@ -27,4 +31,5 @@ as3935@0 {
interrupt-parent = <&gpio1>;
interrupts = <16 1>;
ams,tuning-capacitor-pf = <80>;
+ ams,nflwdth = <0x44>;
};
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 57625653fcb6..1d13bf03c758 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -243,6 +243,8 @@ config DA9150_GPADC
config DLN2_ADC
tristate "Diolan DLN-2 ADC driver support"
depends on MFD_DLN2
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Diolan DLN-2 ADC.
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index bc5b38e3a147..a70ef7fec95f 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -225,6 +225,7 @@ struct at91_adc_trigger {
char *name;
unsigned int trgmod_value;
unsigned int edge_type;
+ bool hw_trig;
};
struct at91_adc_state {
@@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = {
.name = "external_rising",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE,
.edge_type = IRQ_TYPE_EDGE_RISING,
+ .hw_trig = true,
},
{
.name = "external_falling",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL,
.edge_type = IRQ_TYPE_EDGE_FALLING,
+ .hw_trig = true,
},
{
.name = "external_any",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY,
.edge_type = IRQ_TYPE_EDGE_BOTH,
+ .hw_trig = true,
+ },
+ {
+ .name = "software",
+ .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER,
+ .edge_type = IRQ_TYPE_NONE,
+ .hw_trig = false,
},
};
@@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev)
struct at91_adc_state *st;
struct resource *res;
int ret, i;
- u32 edge_type;
+ u32 edge_type = IRQ_TYPE_NONE;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
if (!indio_dev)
@@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev)
ret = of_property_read_u32(pdev->dev.of_node,
"atmel,trigger-edge-type", &edge_type);
if (ret) {
- dev_err(&pdev->dev,
- "invalid or missing value for atmel,trigger-edge-type\n");
- return ret;
+ dev_dbg(&pdev->dev,
+ "atmel,trigger-edge-type not specified, only software trigger available\n");
}
st->selected_trig = NULL;
- for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++)
+ /* find the right trigger, or no trigger at all */
+ for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++)
if (at91_adc_trigger_list[i].edge_type == edge_type) {
st->selected_trig = &at91_adc_trigger_list[i];
break;
@@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, indio_dev);
- ret = at91_adc_buffer_init(indio_dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
- goto per_clk_disable_unprepare;
- }
+ if (st->selected_trig->hw_trig) {
+ ret = at91_adc_buffer_init(indio_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
+ goto per_clk_disable_unprepare;
+ }
- ret = at91_adc_trigger_init(indio_dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "couldn't setup the triggers.\n");
- goto per_clk_disable_unprepare;
+ ret = at91_adc_trigger_init(indio_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "couldn't setup the triggers.\n");
+ goto per_clk_disable_unprepare;
+ }
}
ret = iio_device_register(indio_dev);
if (ret < 0)
goto per_clk_disable_unprepare;
- dev_info(&pdev->dev, "setting up trigger as %s\n",
- st->selected_trig->name);
+ if (st->selected_trig->hw_trig)
+ dev_info(&pdev->dev, "setting up trigger as %s\n",
+ st->selected_trig->name);
dev_info(&pdev->dev, "version: %x\n",
readl_relaxed(st->base + AT91_SAMA5D2_VERSION));
diff --git a/drivers/iio/dummy/iio_simple_dummy_events.c b/drivers/iio/dummy/iio_simple_dummy_events.c
index ed63ffd849f8..7ec2a0bb0807 100644
--- a/drivers/iio/dummy/iio_simple_dummy_events.c
+++ b/drivers/iio/dummy/iio_simple_dummy_events.c
@@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
st->event_en = state;
else
return -EINVAL;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index ebfb1de7377f..91431454eb85 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -865,7 +865,6 @@ complete:
static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
struct zpa2326_private *private)
{
- int ret;
unsigned int val;
long timeout;
@@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
/* Timed out. */
zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
timeout);
- ret = -ETIME;
- } else if (timeout < 0) {
- zpa2326_warn(indio_dev,
- "wait for one shot interrupt cancelled");
- ret = -ERESTARTSYS;
+ return -ETIME;
}
- return ret;
+ zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled");
+ return -ERESTARTSYS;
}
static int zpa2326_init_managed_irq(struct device *parent,
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 0eeff29b61be..4a48b7ba3a1c 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -39,8 +39,12 @@
#define AS3935_AFE_GAIN_MAX 0x1F
#define AS3935_AFE_PWR_BIT BIT(0)
+#define AS3935_NFLWDTH 0x01
+#define AS3935_NFLWDTH_MASK 0x7f
+
#define AS3935_INT 0x03
#define AS3935_INT_MASK 0x0f
+#define AS3935_DISTURB_INT BIT(2)
#define AS3935_EVENT_INT BIT(3)
#define AS3935_NOISE_INT BIT(0)
@@ -48,6 +52,7 @@
#define AS3935_DATA_MASK 0x3F
#define AS3935_TUNE_CAP 0x08
+#define AS3935_DEFAULTS 0x3C
#define AS3935_CALIBRATE 0x3D
#define AS3935_READ_DATA BIT(14)
@@ -62,7 +67,9 @@ struct as3935_state {
struct mutex lock;
struct delayed_work work;
+ unsigned long noise_tripped;
u32 tune_cap;
+ u32 nflwdth_reg;
u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
u8 buf[2] ____cacheline_aligned;
};
@@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
return len;
}
+static ssize_t as3935_noise_level_tripped_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ));
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
+static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO,
+ as3935_noise_level_tripped_show, NULL, 0);
static struct attribute *as3935_attributes[] = {
&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
+ &iio_dev_attr_noise_level_tripped.dev_attr.attr,
NULL,
};
@@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work)
case AS3935_EVENT_INT:
iio_trigger_poll_chained(st->trig);
break;
+ case AS3935_DISTURB_INT:
case AS3935_NOISE_INT:
+ mutex_lock(&st->lock);
+ st->noise_tripped = jiffies;
+ mutex_unlock(&st->lock);
dev_warn(&st->spi->dev, "noise level is too high\n");
break;
}
@@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private)
static void calibrate_as3935(struct as3935_state *st)
{
- /* mask disturber interrupt bit */
- as3935_write(st, AS3935_INT, BIT(5));
-
+ as3935_write(st, AS3935_DEFAULTS, 0x96);
as3935_write(st, AS3935_CALIBRATE, 0x96);
as3935_write(st, AS3935_TUNE_CAP,
BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
mdelay(2);
as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
+ as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg);
}
#ifdef CONFIG_PM_SLEEP
@@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi)
return -EINVAL;
}
+ ret = of_property_read_u32(np,
+ "ams,nflwdth", &st->nflwdth_reg);
+ if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
+ dev_err(&spi->dev,
+ "invalid nflwdth setting of %d\n",
+ st->nflwdth_reg);
+ return -EINVAL;
+ }
+
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->channels = as3935_channels;
@@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi)
return -ENOMEM;
st->trig = trig;
+ st->noise_tripped = jiffies - HZ;
trig->dev.parent = indio_dev->dev.parent;
iio_trigger_set_drvdata(trig, indio_dev);
trig->ops = &iio_interrupt_trigger_ops;
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 1691760339da..02573c517d9d 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -172,7 +172,7 @@ static int ade7759_spi_read_reg_40(struct device *dev,
reg_address);
goto error_ret;
}
- *val = ((u64)st->rx[1] << 32) | (st->rx[2] << 24) |
+ *val = ((u64)st->rx[1] << 32) | ((u64)st->rx[2] << 24) |
(st->rx[3] << 16) | (st->rx[4] << 8) | st->rx[5];
error_ret:
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
index 5f3d8f2339e3..4be864dbd41c 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-vchiq.c
@@ -390,8 +390,7 @@ static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream
__func__, instance);
instance->alsa_stream = alsa_stream;
alsa_stream->instance = instance;
- ret = 0; // xxx todo -1;
- goto err_free_mem;
+ return 0;
}
/* Initialize and create a VCHI connection */
@@ -401,16 +400,15 @@ static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream
LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n",
__func__, ret);
- ret = -EIO;
- goto err_free_mem;
+ return -EIO;
}
ret = vchi_connect(NULL, 0, vchi_instance);
if (ret) {
LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n",
__func__, ret);
- ret = -EIO;
- goto err_free_mem;
+ kfree(vchi_instance);
+ return -EIO;
}
initted = 1;
}
@@ -421,19 +419,16 @@ static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream
if (IS_ERR(instance)) {
LOG_ERR("%s: failed to initialize audio service\n", __func__);
- ret = PTR_ERR(instance);
- goto err_free_mem;
+ /* vchi_instance is retained for use the next time. */
+ return PTR_ERR(instance);
}
instance->alsa_stream = alsa_stream;
alsa_stream->instance = instance;
LOG_DBG(" success !\n");
- ret = 0;
-err_free_mem:
- kfree(vchi_instance);
- return ret;
+ return 0;
}
int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream)