diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvneta.c | 73 |
1 files changed, 34 insertions, 39 deletions
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index b248bcbdae6..14786c8bf99 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -89,8 +89,9 @@ #define MVNETA_TX_IN_PRGRS BIT(1) #define MVNETA_TX_FIFO_EMPTY BIT(8) #define MVNETA_RX_MIN_FRAME_SIZE 0x247c -#define MVNETA_SGMII_SERDES_CFG 0x24A0 +#define MVNETA_SERDES_CFG 0x24A0 #define MVNETA_SGMII_SERDES_PROTO 0x0cc7 +#define MVNETA_QSGMII_SERDES_PROTO 0x0667 #define MVNETA_TYPE_PRIO 0x24bc #define MVNETA_FORCE_UNI BIT(21) #define MVNETA_TXQ_CMD_1 0x24e4 @@ -711,35 +712,6 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp, mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val); } - - -/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */ -static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable) -{ - u32 val; - - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - - if (enable) - val |= MVNETA_GMAC2_PORT_RGMII; - else - val &= ~MVNETA_GMAC2_PORT_RGMII; - - mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); -} - -/* Config SGMII port */ -static void mvneta_port_sgmii_config(struct mvneta_port *pp) -{ - u32 val; - - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - val |= MVNETA_GMAC2_PCS_ENABLE; - mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); - - mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); -} - /* Start the Ethernet port RX and TX activity */ static void mvneta_port_up(struct mvneta_port *pp) { @@ -2749,26 +2721,44 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp, } /* Power up the port */ -static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) +static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) { - u32 val; + u32 ctrl; /* MAC Cause register should be cleared */ mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); - if (phy_mode == PHY_INTERFACE_MODE_SGMII) - mvneta_port_sgmii_config(pp); + ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - mvneta_gmac_rgmii_set(pp, 1); + /* Even though it might look weird, when we're configured in + * SGMII or QSGMII mode, the RGMII bit needs to be set. + */ + switch(phy_mode) { + case PHY_INTERFACE_MODE_QSGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); + ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + break; + case PHY_INTERFACE_MODE_SGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); + ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + ctrl |= MVNETA_GMAC2_PORT_RGMII; + break; + default: + return -EINVAL; + } /* Cancel Port Reset */ - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - val &= ~MVNETA_GMAC2_PORT_RESET; - mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); + ctrl &= ~MVNETA_GMAC2_PORT_RESET; + mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl); while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) & MVNETA_GMAC2_PORT_RESET) != 0) continue; + + return 0; } /* Device initialization routine */ @@ -2879,7 +2869,12 @@ static int mvneta_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't init eth hal\n"); goto err_free_stats; } - mvneta_port_power_up(pp, phy_mode); + + err = mvneta_port_power_up(pp, phy_mode); + if (err < 0) { + dev_err(&pdev->dev, "can't power up port\n"); + goto err_deinit; + } dram_target_info = mv_mbus_dram_info(); if (dram_target_info) |