thermal/drivers/loongson2: Add Loongson-2K2000 supportthermal/tuxsuite

The Loongson-2K2000 and Loongson-2K1000 have similar thermal sensors,
except that the temperature is read differently.

In particular, the temperature output registers of the Loongson-2K2000
are defined in the chip configuration domain and are read in a different
way.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/fdbfdcc3231a36a4ee0bcf1377ddcbd6f8c944b5.1713837379.git.zhoubinbin@loongson.cn

1 files changed, 51 insertions, 13 deletions

diff --git a/drivers/thermal/loongson2_thermal.c b/drivers/thermal/loongson2_thermal.c
index 5c9cf45a3719..2d6b75b0539f 100644
--- a/drivers/thermal/loongson2_thermal.c
+++ b/drivers/thermal/loongson2_thermal.c
@@ -30,12 +30,20 @@
 					 LOONGSON2_THSENS_INT_HIGH)
 #define LOONGSON2_THSENS_OUT_MASK	0xFF
 
+/*
+ * This flag is used to indicate the temperature reading
+ * method of the Loongson-2K2000
+ */
+#define LS2K2000_THSENS_OUT_FLAG	BIT(0)
+
 struct loongson2_thermal_chip_data {
 	unsigned int thermal_sensor_sel;
+	unsigned int flags;
 };
 
 struct loongson2_thermal_data {
-	void __iomem *regs;
+	void __iomem *ctrl_reg;
+	void __iomem *temp_reg;
 	const struct loongson2_thermal_chip_data *chip_data;
 };
 
@@ -48,7 +56,7 @@ static void loongson2_set_ctrl_regs(struct loongson2_thermal_data *data,
 
 	reg_ctrl = ctrl_data + HECTO;
 	reg_ctrl |= enable ? 0x100 : 0;
-	writew(reg_ctrl, data->regs + ctrl_reg + reg_off);
+	writew(reg_ctrl, data->ctrl_reg + ctrl_reg + reg_off);
 }
 
 static int loongson2_thermal_set(struct loongson2_thermal_data *data,
@@ -63,13 +71,24 @@ static int loongson2_thermal_set(struct loongson2_thermal_data *data,
 	return 0;
 }
 
-static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+static int loongson2_2k1000_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	int val;
+	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
+
+	val = readl(data->ctrl_reg + LOONGSON2_THSENS_OUT_REG);
+	*temp = ((val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
+
+	return 0;
+}
+
+static int loongson2_2k2000_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	u32 reg_val;
+	int val;
 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
 
-	reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG);
-	*temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
+	val = readl(data->temp_reg);
+	*temp = ((val & 0xffff) * 820 / 0x4000 - 311) * KILO;
 
 	return 0;
 }
@@ -79,7 +98,7 @@ static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
 	struct thermal_zone_device *tzd = dev;
 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
 
-	writeb(LOONGSON2_THSENS_INT_EN, data->regs + LOONGSON2_THSENS_STATUS_REG);
+	writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
 
 	thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
 
@@ -93,8 +112,8 @@ static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low,
 	return loongson2_thermal_set(data, low/MILLI, high/MILLI, true);
 }
 
-static const struct thermal_zone_device_ops loongson2_of_thermal_ops = {
-	.get_temp = loongson2_thermal_get_temp,
+static struct thermal_zone_device_ops loongson2_of_thermal_ops = {
+	.get_temp = loongson2_2k1000_get_temp,
 	.set_trips = loongson2_thermal_set_trips,
 };
 
@@ -111,15 +130,24 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
 
 	data->chip_data = device_get_match_data(dev);
 
-	data->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(data->regs))
-		return PTR_ERR(data->regs);
+	data->ctrl_reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->ctrl_reg))
+		return PTR_ERR(data->ctrl_reg);
+
+	/* The temperature output register is separate for Loongson-2K2000 */
+	if (data->chip_data->flags & LS2K2000_THSENS_OUT_FLAG) {
+		data->temp_reg = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(data->temp_reg))
+			return PTR_ERR(data->temp_reg);
+
+		loongson2_of_thermal_ops.get_temp = loongson2_2k2000_get_temp;
+	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 
-	writeb(LOONGSON2_THSENS_INT_EN, data->regs + LOONGSON2_THSENS_STATUS_REG);
+	writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
 
 	loongson2_thermal_set(data, 0, 0, false);
 
@@ -148,6 +176,12 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
 
 static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
 	.thermal_sensor_sel = 0,
+	.flags = 0,
+};
+
+static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k2000_data = {
+	.thermal_sensor_sel = 0,
+	.flags = LS2K2000_THSENS_OUT_FLAG,
 };
 
 static const struct of_device_id of_loongson2_thermal_match[] = {
@@ -155,6 +189,10 @@ static const struct of_device_id of_loongson2_thermal_match[] = {
 		.compatible = "loongson,ls2k1000-thermal",
 		.data = &loongson2_thermal_ls2k1000_data,
 	},
+	{
+		.compatible = "loongson,ls2k2000-thermal",
+		.data = &loongson2_thermal_ls2k2000_data,
+	},
 	{ /* end */ }
 };
 MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);