1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
|
// SPDX-License-Identifier: GPL-2.0+
//
// Copyright (C) 2020 TQ-Systems GmbH
/ {
aliases {
mmc1 = &usdhc2;
};
chosen {
linux,stdout-path = &uart2;
stdout-path = &uart2;
};
regulators {
reg_mba6_3p3v: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "supply-mba6-3p3v";
reg = <1>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_otgvbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_otgpwr>;
regulator-name = "otg-vbus-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin_supply = <®_3p3v>;
};
};
};
&fec {
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <1>;
phy-reset-post-delay = <100>;
phy-handle = <ðphy>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy: ethernet-phy@3 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
reg = <3>;
force-master;
max-speed = <1000>;
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
mba6 {
pinctrl_enet: enetgrp {
fsl,pins = <
/* FEC phy IRQ */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008
/* FEC phy reset */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099
/* DSE = 100, 100k up, SPEED = MED */
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0
/* DSE = 111, pull 100k up */
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
/* DSE = 111, pull external */
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b099 /* LCD.PWR_EN */
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0001b099 /* LCD.RESET */
/* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
>;
};
pinctrl_reg_otgpwr: regotgpwrgrp {
fsl,pins = <
/* OTG_PWR */
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b099
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071
/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059
>;
};
};
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
vbus-supply = <®_otgvbus>;
status = "okay";
};
&usdhc2 { /* Baseboard Slot */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vmmc-supply = <®_mba6_3p3v>;
bus-width = <4>;
no-1-8-v;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&wdog1 {
status = "okay";
};
|
