diff options
Diffstat (limited to 'board/sunxi/board.c')
| -rw-r--r-- | board/sunxi/board.c | 34 |
1 files changed, 24 insertions, 10 deletions
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index f85e825891..9c855f604d 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -31,6 +31,7 @@ #include <asm/arch/usb_phy.h> #include <asm/gpio.h> #include <asm/io.h> +#include <nand.h> #include <net.h> #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) @@ -107,26 +108,44 @@ int dram_init(void) return 0; } -#if defined(CONFIG_SPL_NAND_SUNXI) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD) static void nand_pinmux_setup(void) { unsigned int pin; - for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++) - sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND); - for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++) + for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(19); pin++) sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND); +#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN7I + for (pin = SUNXI_GPC(20); pin <= SUNXI_GPC(22); pin++) + sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND); +#endif + /* sun4i / sun7i do have a PC23, but it is not used for nand, + * only sun7i has a PC24 */ +#ifdef CONFIG_MACH_SUN7I sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_NAND); +#endif } static void nand_clock_setup(void) { struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0)); +#ifdef CONFIG_MACH_SUN9I + setbits_le32(&ccm->ahb_gate1, (1 << AHB_GATE_OFFSET_DMA)); +#else + setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_DMA)); +#endif setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1); } + +void board_nand_init(void) +{ + nand_pinmux_setup(); + nand_clock_setup(); +} #endif #ifdef CONFIG_GENERIC_MMC @@ -437,7 +456,7 @@ void sunxi_board_init(void) #ifdef CONFIG_AXP221_POWER power_failed = axp221_init(); power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT); - power_failed |= axp221_set_dcdc2(1200); /* A31:VDD-GPU, A23:VDD-SYS */ + power_failed |= axp221_set_dcdc2(CONFIG_AXP221_DCDC2_VOLT); power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */ #ifdef CONFIG_MACH_SUN6I power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */ @@ -453,11 +472,6 @@ void sunxi_board_init(void) power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT); #endif -#ifdef CONFIG_SPL_NAND_SUNXI - nand_pinmux_setup(); - nand_clock_setup(); -#endif - printf("DRAM:"); ramsize = sunxi_dram_init(); printf(" %lu MiB\n", ramsize >> 20); |