ARM: plat-nomadik: move DMA40 header to <linux/platform_data>

This moves the DMA40 platform data header from <plat/ste_dma40.h>
to <linux/platform_data/dma-ste-dma40.h> where is belongs.

Cc: Dan Williams <djbw@fb.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

12 files changed, 12 insertions, 18 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 33631c9f121..71a2ca72647 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -8,8 +8,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/devices.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 9c8e4a9e83e..051b62c2710 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -11,9 +11,9 @@
 #include <linux/amba/mmci.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 0a3dd601a40..0213e896fbf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -38,13 +38,12 @@
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
-#include <plat/ste_dma40.h>
-
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 91754a8a0d4..bdc963cb2f4 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,8 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 3cc7142eee0..9991aea3d57 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -8,7 +8,7 @@
 #ifndef __MSP_H
 #define __MSP_H
 
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 enum msp_i2s_id {
 	MSP_I2S_0 = 0,
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 145482e7441..78ac65f62e8 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,10 +7,10 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
-#include <plat/ste_dma40.h>
 #include <mach/hardware.h>
-#include <linux/platform_data/usb-musb-ux500.h>
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index bc615cc5626..8bc5fef07e7 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/semaphore.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <crypto/aes.h>
 #include <crypto/algapi.h>
@@ -30,8 +31,6 @@
 #include <crypto/des.h>
 #include <crypto/scatterwalk.h>
 
-#include <plat/ste_dma40.h>
-
 #include <linux/platform_data/crypto-ux500.h>
 #include <mach/hardware.h>
 
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index ae55091c227..23c5573e62d 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -19,8 +19,7 @@
 #include <linux/err.h>
 #include <linux/amba/bus.h>
 #include <linux/regulator/consumer.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include "dmaengine.h"
 #include "ste_dma40_ll.h"
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index cad9e1daedf..851ad56e840 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/kernel.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include "ste_dma40_ll.h"
 
diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h
index 5b2d0817e26..94df96d9a33 100644
--- a/include/linux/platform_data/crypto-ux500.h
+++ b/include/linux/platform_data/crypto-ux500.h
@@ -7,7 +7,7 @@
 #ifndef _CRYPTO_UX500_H
 #define _CRYPTO_UX500_H
 #include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 struct hash_platform_data {
 	void *mem_to_engine;
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 9ff93b06568..9ff93b06568 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c
index 1a04e248453..b55b79f7536 100644
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -18,8 +18,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/slab.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>