Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
 "This contains a set of device-tree conversions for Marvell Orion
  platforms that were staged early but took a few tries to get the
  branch into a format where it was suitable for us to pick up.

  Given that most people working on these platforms are hobbyists with
  limited time, we were a bit more flexible with merging it even though
  it came in late."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

Conflicts:
	drivers/watchdog/orion_wdt.c

1 files changed, 33 insertions, 35 deletions

diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 16734c1b5df..d430713ea9b 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-325 NAS (Rev A1)";
@@ -15,45 +15,43 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
+	gpio-leds {
+		compatible = "gpio-leds";
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+			linux,default-trigger = "default-on";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
 		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
+		};
+	};
 
-		nand@3000000 {
+	ocp@f1000000 {
+		i2c@11000 {
 			status = "okay";
 
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
 			};
 		};
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
 	};
 };