Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 12 insertions, 12 deletions

diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 5a2cbfac66d..d2339ea3781 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -518,7 +518,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
 	if (status & UART_MSR_DCTS) {
 		port->icount.cts++;
 		tty = tty_port_tty_get(&port->port);
-		if (tty && (tty->termios->c_cflag & CRTSCTS)) {
+		if (tty && (tty->termios.c_cflag & CRTSCTS)) {
 			int cts = (status & UART_MSR_CTS);
 			if (tty->hw_stopped) {
 				if (cts) {
@@ -671,12 +671,12 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
 	port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
 	port->mctrl = TIOCM_OUT2;
 
-	sdio_uart_change_speed(port, tty->termios, NULL);
+	sdio_uart_change_speed(port, &tty->termios, NULL);
 
-	if (tty->termios->c_cflag & CBAUD)
+	if (tty->termios.c_cflag & CBAUD)
 		sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
 
-	if (tty->termios->c_cflag & CRTSCTS)
+	if (tty->termios.c_cflag & CRTSCTS)
 		if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
 			tty->hw_stopped = 1;
 
@@ -850,7 +850,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
 {
 	struct sdio_uart_port *port = tty->driver_data;
 
-	if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+	if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
 		return;
 
 	if (sdio_uart_claim_func(port) != 0)
@@ -861,7 +861,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
 		sdio_uart_start_tx(port);
 	}
 
-	if (tty->termios->c_cflag & CRTSCTS)
+	if (tty->termios.c_cflag & CRTSCTS)
 		sdio_uart_clear_mctrl(port, TIOCM_RTS);
 
 	sdio_uart_irq(port->func);
@@ -872,7 +872,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
 {
 	struct sdio_uart_port *port = tty->driver_data;
 
-	if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+	if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
 		return;
 
 	if (sdio_uart_claim_func(port) != 0)
@@ -887,7 +887,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
 		}
 	}
 
-	if (tty->termios->c_cflag & CRTSCTS)
+	if (tty->termios.c_cflag & CRTSCTS)
 		sdio_uart_set_mctrl(port, TIOCM_RTS);
 
 	sdio_uart_irq(port->func);
@@ -898,12 +898,12 @@ static void sdio_uart_set_termios(struct tty_struct *tty,
 						struct ktermios *old_termios)
 {
 	struct sdio_uart_port *port = tty->driver_data;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 
 	if (sdio_uart_claim_func(port) != 0)
 		return;
 
-	sdio_uart_change_speed(port, tty->termios, old_termios);
+	sdio_uart_change_speed(port, &tty->termios, old_termios);
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
@@ -1132,8 +1132,8 @@ static int sdio_uart_probe(struct sdio_func *func,
 		kfree(port);
 	} else {
 		struct device *dev;
-		dev = tty_register_device(sdio_uart_tty_driver,
-						port->index, &func->dev);
+		dev = tty_port_register_device(&port->port,
+				sdio_uart_tty_driver, port->index, &func->dev);
 		if (IS_ERR(dev)) {
 			sdio_uart_port_remove(port);
 			ret = PTR_ERR(dev);