aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/Kconfig1
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c29
-rw-r--r--drivers/pci/hotplug/pciehp_ctrl.c3
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c27
-rw-r--r--drivers/pci/hotplug/shpchp_core.c4
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c4
6 files changed, 47 insertions, 21 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b6f9749b4fa..f02b5235056 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -76,6 +76,7 @@ config PCI_IOV
config PCI_PRI
bool "PCI PRI support"
+ depends on PCI
select PCI_ATS
help
PRI is the PCI Page Request Interface. It allows PCI devices that are
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 596172b4ae9..fce1c54a0c8 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -459,8 +459,17 @@ static int add_bridge(acpi_handle handle)
{
acpi_status status;
unsigned long long tmp;
+ struct acpi_pci_root *root;
acpi_handle dummy_handle;
+ /*
+ * We shouldn't use this bridge if PCIe native hotplug control has been
+ * granted by the BIOS for it.
+ */
+ root = acpi_pci_find_root(handle);
+ if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
+ return -ENODEV;
+
/* if the bridge doesn't have _STA, we assume it is always there */
status = acpi_get_handle(handle, "_STA", &dummy_handle);
if (ACPI_SUCCESS(status)) {
@@ -1376,13 +1385,23 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type,
static acpi_status
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
+ struct acpi_pci_root *root;
int *count = (int *)context;
- if (acpi_is_root_bridge(handle)) {
- acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
- handle_hotplug_event_bridge, NULL);
- (*count)++;
- }
+ if (!acpi_is_root_bridge(handle))
+ return AE_OK;
+
+ root = acpi_pci_find_root(handle);
+ if (!root)
+ return AE_OK;
+
+ if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)
+ return AE_OK;
+
+ (*count)++;
+ acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ handle_hotplug_event_bridge, NULL);
+
return AE_OK ;
}
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 1e9c9aacc3a..085dbb5fc16 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -213,9 +213,6 @@ static int board_added(struct slot *p_slot)
goto err_exit;
}
- /* Wait for 1 second after checking link training status */
- msleep(1000);
-
/* Check for a power fault */
if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) {
ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot));
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 96dc4734e4a..7b1414810ae 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -280,6 +280,14 @@ int pciehp_check_link_status(struct controller *ctrl)
else
msleep(1000);
+ /*
+ * Need to wait for 1000 ms after Data Link Layer Link Active
+ * (DLLLA) bit reads 1b before sending configuration request.
+ * We need it before checking Link Training (LT) bit becuase
+ * LT is still set even after DLLLA bit is set on some platform.
+ */
+ msleep(1000);
+
retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
if (retval) {
ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
@@ -294,6 +302,16 @@ int pciehp_check_link_status(struct controller *ctrl)
return retval;
}
+ /*
+ * If the port supports Link speeds greater than 5.0 GT/s, we
+ * must wait for 100 ms after Link training completes before
+ * sending configuration request.
+ */
+ if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT)
+ msleep(100);
+
+ pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
return retval;
}
@@ -484,7 +502,6 @@ int pciehp_power_on_slot(struct slot * slot)
u16 slot_cmd;
u16 cmd_mask;
u16 slot_status;
- u16 lnk_status;
int retval = 0;
/* Clear sticky power-fault bit from previous power failures */
@@ -516,14 +533,6 @@ int pciehp_power_on_slot(struct slot * slot)
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
- retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
- __func__);
- return retval;
- }
- pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
-
return retval;
}
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index aca972bbfb4..dd7e0c51a33 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -278,8 +278,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
static int is_shpc_capable(struct pci_dev *dev)
{
- if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
- PCI_DEVICE_ID_AMD_GOLAM_7450))
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
return 1;
if (!pci_find_capability(dev, PCI_CAP_ID_SHPC))
return 0;
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 36547f0ce30..75ba2311b54 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -944,8 +944,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
ctrl_dbg(ctrl, "Hotplug Controller:\n");
- if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
- PCI_DEVICE_ID_AMD_GOLAM_7450)) {
+ if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+ pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) {
/* amd shpc driver doesn't use Base Offset; assume 0 */
ctrl->mmio_base = pci_resource_start(pdev, 0);
ctrl->mmio_size = pci_resource_len(pdev, 0);