diff options
Diffstat (limited to 'manual/generic/linux/usb-3.0-arndale5250.yaml')
| -rw-r--r-- | manual/generic/linux/usb-3.0-arndale5250.yaml | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/manual/generic/linux/usb-3.0-arndale5250.yaml b/manual/generic/linux/usb-3.0-arndale5250.yaml new file mode 100644 index 0000000..59ca59e --- /dev/null +++ b/manual/generic/linux/usb-3.0-arndale5250.yaml @@ -0,0 +1,121 @@ +metadata: + name: usb-3.0-arndale5250 + format: "Manual Test Definition 1.0" + description: "Check enablement of USB 3.0 on Samsung Arndale 5250 board." + maintainer: + - botao.sun@linaro.org + os: + - ubuntu + scope: + - functional + devices: + - arndale + environment: + - manual-test + +run: + steps: + - "Plug an external USB storage device to on-board USB 3.0 slot." + - "Power on the board until boot up successfully." + - "In serial console, run: + # fdisk -l + # mount /dev/sda1 /media + # cd /media + # ls -l + # lsusb + # lsusb -t + # cd .. + # umount /media" + expected: + - "the output of command line 'fdisk -l' should look like this: + # fdisk -l + + Disk /dev/mmcblk0: 4001 MB, 4001366016 bytes + 4 heads, 16 sectors/track, 122112 cylinders, total 7815168 sectors + Units = sectors of 1 * 512 = 512 bytes + Sector size (logical/physical): 512 bytes / 512 bytes + I/O size (minimum/optimal): 512 bytes / 512 bytes + Disk identifier: 0x00000000 + + Device Boot Start End Blocks Id System + /dev/mmcblk0p1 3031424 7815167 2391872 c W95 FAT32 (LBA) + /dev/mmcblk0p2 31168 1031295 500064 83 Linux + /dev/mmcblk0p3 1031296 2031359 500032 83 Linux + /dev/mmcblk0p4 2031360 3031423 500032 83 Linux + + Partition table entries are not in disk order + + Disk /dev/mmcblk0rpmb: 0 MB, 131072 bytes + 4 heads, 16 sectors/track, 4 cylinders, total 256 sectors + Units = sectors of 1 * 512 = 512 bytes + Sector size (logical/physical): 512 bytes / 512 bytes + I/O size (minimum/optimal): 512 bytes / 512 bytes + Disk identifier: 0x00000000 + + Disk /dev/mmcblk0rpmb doesn't contain a valid partition table + + Disk /dev/mmcblk0boot1: 1 MB, 1048576 bytes + 4 heads, 16 sectors/track, 32 cylinders, total 2048 sectors + Units = sectors of 1 * 512 = 512 bytes + Sector size (logical/physical): 512 bytes / 512 bytes + I/O size (minimum/optimal): 512 bytes / 512 bytes + Disk identifier: 0x00000000 + + Disk /dev/mmcblk0boot1 doesn't contain a valid partition table + + Disk /dev/mmcblk0boot0: 1 MB, 1048576 bytes + 4 heads, 16 sectors/track, 32 cylinders, total 2048 sectors + Units = sectors of 1 * 512 = 512 bytes + Sector size (logical/physical): 512 bytes / 512 bytes + I/O size (minimum/optimal): 512 bytes / 512 bytes + Disk identifier: 0xea000790 + + Disk /dev/mmcblk0boot0 doesn't contain a valid partition table + + Disk /dev/mmcblk1: 7948 MB, 7948206080 bytes + 128 heads, 32 sectors/track, 3790 cylinders, total 15523840 sectors + Units = sectors of 1 * 512 = 512 bytes + Sector size (logical/physical): 512 bytes / 512 bytes + I/O size (minimum/optimal): 512 bytes / 512 bytes + Disk identifier: 0x00000000 + + Device Boot Start End Blocks Id System + /dev/mmcblk1p1 1 8191 4095+ da Non-FS data + /dev/mmcblk1p2 * 8192 114687 53248 c W95 FAT32 (LBA) + /dev/mmcblk1p3 114688 2097151 991232 83 Linux + + Disk /dev/sda: 7948 MB, 7948206080 bytes + 81 heads, 10 sectors/track, 19165 cylinders, total 15523840 sectors + Units = sectors of 1 * 512 = 512 bytes + Sector size (logical/physical): 512 bytes / 512 bytes + I/O size (minimum/optimal): 512 bytes / 512 bytes + Disk identifier: 0x00000000 + + Device Boot Start End Blocks Id System + /dev/sda1 8192 15523839 7757824 b W95 FAT32 + #" + + - "command line 'mount /dev/sda1 /media' should be executed successfully, the contents on USB external storage device should be shown after run 'ls -l'" + + - "the output of 'lsusb' and 'lsusb -t' should look like this: + # lsusb + Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 003 Device 002: ID 05e3:0717 Genesys Logic, Inc. All-in-1 Card Reader + Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 001 Device 004: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet + Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub + Bus 001 Device 002: ID 0424:3503 Standard Microsystems Corp. + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + # + + # lsusb -t + /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M + /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M + |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M + /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M + /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M + |__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/3p, 480M + |__ Port 2: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M + |__ Port 4: Dev 4, If 0, Class=Vendor Specific Class, Driver=asix, 480M + #" |