summaryrefslogtreecommitdiff
path: root/ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf
diff options
context:
space:
mode:
Diffstat (limited to 'ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf')
-rw-r--r--ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf498
1 files changed, 253 insertions, 245 deletions
diff --git a/ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf b/ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf
index b6699471..afc2fff4 100644
--- a/ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf
+++ b/ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf
@@ -1,245 +1,253 @@
-#
-# Copyright (c) 2011, ARM Limited. All rights reserved.
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-################################################################################
-#
-# FD Section
-# The [FD] Section is made up of the definition statements and a
-# description of what goes into the Flash Device Image. Each FD section
-# defines one flash "device" image. A flash device image may be one of
-# the following: Removable media bootable image (like a boot floppy
-# image,) an Option ROM image (that would be "flashed" into an add-in
-# card,) a System "Flash" image (that would be burned into a system's
-# flash) or an Update ("Capsule") image that will be used to update and
-# existing system flash.
-#
-################################################################################
-
-[FD.ArmPlatform_EFI]
-BaseAddress = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
-ErasePolarity = 1
-
-# This one is tricky, it must be: BlockSize * NumBlocks = Size
-BlockSize = 0x00001000
-NumBlocks = 0x200
-
-################################################################################
-#
-# Following are lists of FD Region layout which correspond to the locations of different
-# images within the flash device.
-#
-# Regions must be defined in ascending order and may not overlap.
-#
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
-# the pipe "|" character, followed by the size of the region, also in hex with the leading
-# "0x" characters. Like:
-# Offset|Size
-# PcdOffsetCName|PcdSizeCName
-# RegionType <FV, DATA, or FILE>
-#
-################################################################################
-
-0x00000000|0x00200000
-gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
-FV = FVMAIN_COMPACT
-
-
-################################################################################
-#
-# FV Section
-#
-# [FV] section is used to define what components or modules are placed within a flash
-# device file. This section also defines order the components and modules are positioned
-# within the image. The [FV] section consists of define statements, set statements and
-# module statements.
-#
-################################################################################
-
-[FV.FvMain]
-BlockSize = 0x40
-NumBlocks = 0 # This FV gets compressed so make it just big enough
-FvAlignment = 8 # FV alignment and FV attributes setting.
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-
- INF MdeModulePkg/Core/Dxe/DxeMain.inf
-
- #
- # PI DXE Drivers producing Architectural Protocols (EFI Services)
- #
- INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
- INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
- INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
- INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
- INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
- INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
- INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
- INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
- INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
- INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
-
- # Simple TextIn/TextOut for UEFI Terminal
- INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
-
- #
- # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
- #
- INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
-
- #
- # FAT filesystem + GPT/MBR partitioning
- #
- INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
- INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
- INF FatPkg/EnhancedFatDxe/Fat.inf
- INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
-
- #
- # UEFI application (Shell Embedded Boot Loader)
- #
- INF EmbeddedPkg/Ebl/Ebl.inf
-
- #
- # Bds
- #
- INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
- INF ArmPlatformPkg/Bds/Bds.inf
-
-
-[FV.FVMAIN_COMPACT]
-FvAlignment = 8
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-
- INF ArmPlatformPkg/PrePi/PeiUniCore.inf
-
- FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
- SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
- SECTION FV_IMAGE = FVMAIN
- }
- }
-
-
-################################################################################
-#
-# Rules are use with the [FV] section's module INF type to define
-# how an FFS file is created for a given INF file. The following Rule are the default
-# rules for the different module type. User can add the customized rules to define the
-# content of the FFS file.
-#
-################################################################################
-
-
-############################################################################
-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
-############################################################################
-#
-#[Rule.Common.DXE_DRIVER]
-# FILE DRIVER = $(NAMED_GUID) {
-# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
-# COMPRESS PI_STD {
-# GUIDED {
-# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
-# UI STRING="$(MODULE_NAME)" Optional
-# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
-# }
-# }
-# }
-#
-############################################################################
-
-[Rule.Common.SEC]
- FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
- TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- }
-
-[Rule.Common.PEI_CORE]
- FILE PEI_CORE = $(NAMED_GUID) {
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING ="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.PEIM]
- FILE PEIM = $(NAMED_GUID) {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.PEIM.TIANOCOMPRESSED]
- FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
- }
-
-[Rule.Common.DXE_CORE]
- FILE DXE_CORE = $(NAMED_GUID) {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.UEFI_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.DXE_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.DXE_RUNTIME_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.UEFI_APPLICATION]
- FILE APPLICATION = $(NAMED_GUID) {
- UI STRING ="$(MODULE_NAME)" Optional
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- }
+#
+# Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.ArmPlatform_EFI]
+BaseAddress = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+0x00000000|0x00200000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 8 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+ INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ # Simple TextIn/TextOut for UEFI Terminal
+ INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
+
+ #
+ # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
+ #
+ INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatBinPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF EmbeddedPkg/Ebl/Ebl.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF ArmPlatformPkg/Bds/Bds.inf
+
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 8
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF ArmPlatformPkg/PrePi/PeiUniCore.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+[Rule.Common.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
+ TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) {
+ TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+ }
+
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ UI STRING ="$(MODULE_NAME)" Optional
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 01:27:32 +0000