1 files changed, 103 insertions, 0 deletions
diff --git a/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c
new file mode 100644
index 00000000..9bfe42e6
--- /dev/null
+++ b/ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortExtLib.c
@@ -0,0 +1,103 @@
+/** @file
+  Serial I/O Port library functions with no library constructor/destructor
+
+  Copyright (c) 2012, ARM Ltd. All rights reserved.<BR>
+  
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/SerialPortExtLib.h>
+
+#include <Drivers/PL011Uart.h>
+
+/**
+  Set new attributes to PL011.
+
+  @param  BaudRate                The baud rate of the serial device. If the baud rate is not supported,
+                                  the speed will be reduced down to the nearest supported one and the
+                                  variable's value will be updated accordingly.
+  @param  ReceiveFifoDepth        The number of characters the device will buffer on input. If the specified
+                                  value is not supported, the variable's value will be reduced down to the
+                                  nearest supported one.
+  @param  Timeout                 If applicable, the number of microseconds the device will wait
+                                  before timing out a Read or a Write operation.
+  @param  Parity                  If applicable, this is the EFI_PARITY_TYPE that is computed or checked
+                                  as each character is transmitted or received. If the device does not
+                                  support parity, the value is the default parity value.
+  @param  DataBits                The number of data bits in each character
+  @param  StopBits                If applicable, the EFI_STOP_BITS_TYPE number of stop bits per character.
+                                  If the device does not support stop bits, the value is the default stop
+                                  bit value.
+
+  @retval EFI_SUCCESS             All attributes were set correctly on the serial device.
+  @retval EFI_INVALID_PARAMETERS  One or more of the attributes has an unsupported value.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+  IN UINT64              BaudRate,
+  IN UINT32              ReceiveFifoDepth,
+  IN UINT32              Timeout,
+  IN EFI_PARITY_TYPE     Parity,
+  IN UINT8               DataBits,
+  IN EFI_STOP_BITS_TYPE  StopBits
+  )
+{
+  return PL011UartInitializePort (
+        (UINTN)PcdGet64 (PcdSerialRegisterBase),
+        BaudRate,
+        ReceiveFifoDepth,
+        Parity,
+        DataBits,
+        StopBits);
+}
+
+/**
+  Set the serial device control bits.
+
+  @param  Control                 Control bits which are to be set on the serial device.
+
+  @retval EFI_SUCCESS             The new control bits were set on the serial device.
+  @retval EFI_UNSUPPORTED         The serial device does not support this operation.
+  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+  IN UINT32                  Control
+  )
+{
+  return PL011UartSetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
+}
+
+/**
+  Get the serial device control bits.
+
+  @param  Control                 Control signals read from the serial device.
+
+  @retval EFI_SUCCESS             The control bits were read from the serial device.
+  @retval EFI_DEVICE_ERROR        The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+  OUT UINT32                  *Control
+  )
+{
+  return PL011UartGetControl ((UINTN)PcdGet64 (PcdSerialRegisterBase), Control);
+}
+