index
:
working/broadcom/kernel.git
llct/capri-support
master
public-review/ARM-bcm_defconfig-Do-not-expect-appended-DTB
public-review/ARM-dts-Leave-sdio1-as-disabled-on-bcm28155-ap
public-review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
public-review/Add-Broadcom-Kona-I2C-Support-v2-on-v3.13-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v1
public-review/Add-Broadcom-Kona-PWM-Support-v1-on-v3.12-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v2
public-review/Add-Broadcom-Kona-PWM-Support-v5
public-review/Enable-I2C-on-bcm-28155-ap
public-review/Improve-support-for-deferred-regulators-v2
public-review/Set-n_voltages-for-linear-reg
public-review/Try-other-signal-levels-during-power-up-v2
public-review/Update-Kona-drivers-to-use-clocks-v4
public-review/Update-bcm_defconfig
public-review/Use-mmc-core-regulator-infrastucture
public-review/clocksource-kona-Print-warning-rather-than-panic
pull/spear-clocksource-init
review/ARM-DT-Add-missing-UARTs-for-bcm11351-bcm281xx
review/ARM-bcm281xx-Board-specific-reboot-code-v1
review/ARM-bcm281xx-Board-specific-reboot-code-v2
review/ARM-bcm281xx-Board-specific-reboot-code-v3
review/ARM-bcm281xx-GPIO-driver-v1
review/ARM-bcm281xx-TMON-driver-v1
review/ARM-bcm281xx-TMON-driver-v2
review/ARM-bcm281xx-adding-bcm28155-ap-dts-v1
review/ARM-bcm281xx-thermal-v1
review/ARM-bcm281xx-thermal-v2
review/ARM-bcm281xx-turn-on-l2-cache-v1
review/ARM-bcm281xx-turn-on-socket-network-support-v1
review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
review/Add-Broadcom-Kona-I2C-Support-v1
review/Update-Kona-drivers-to-use-clocks-v1
review/Update-Kona-drivers-to-use-clocks-v2
review/arm-configs-bcm-remove-debug-ll-v1
review/bcm-bus-clk-v5
review/bcm-bus-clk-v6
review/bcm-smp-v4
review/bcm-smp-v5
review/bcm-smp-v6
review/bcm281xx-udc-v1
review/bcm281xx-udc-v3
review/bcm281xx-udc-v4
review/bcm281xx-udc-v5
review/bcm281xx-udc-v9
review/bcm2835
review/bcm59056-pmu-v1
review/bcm59056-pmu-v2
review/bcm59056-pmu-v3
review/bcm59056-pmu-v4
review/bcm59056-pmu-v5
review/bcm59056-reboot-fix
review/bcm590xx-add-addtl-regulators-v1
review/bcm590xx-add-addtl-regulators-v2
review/capri-boot-3.15-v1
review/capri-smp
review/clang-asm
review/do_syslog_tweak
review/dw8250_clock
review/dw8250_clock-v2
review/dw8250_clock-v3
review/enable-method-bindings-v3
review/enable-method-bindings-v4
review/gpio-centralize-locking-v1
review/gpio-fix-parameter-v1
review/gpio-get-v1
review/gpio-get-v2
review/gpio-irq-handler-v1
review/gpio-setup-message
review/gpio-unsigned-fix-v1
review/hawaii-v1
review/hawaii-v2
review/minor-printk-fixes
review/minor-printk-fixes-v2
review/mmc-card-event
review/mmc-for-tkryger-v2
review/mmc-for-tkryger-v3
review/mmc-for-tkryger-v4
review/mmc-sdhci-bcm-kona-fix-nonremovable-test-v1
review/mmc-sdhci-bcm-kona-linker-section-warning-v1
review/mmc-sdhci-bcm-kona-make-warning-go-away-v1
review/more-printk-flags
review/more-printk-flags-v2
review/printk-flags-v6
review/printk-flags-v7
review/sdhci-cd
review/sdhci-cd-v2
review/sdhci-cd-v3
review/serial-8250_dw-Improve-unwritable-LCR-workaround-v2
review/watchdog-v1
rfc/watchdog-resolution
wip/bcm59056-pmu-v3
Broadcom Landing Team Kernel
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
drivers
/
usb
/
serial
/
pl2303.c
Age
Commit message (
Expand
)
Author
2014-04-16
USB: pl2303: add ids for Hewlett-Packard HP POS pole displays
Aaron Sanders
2014-01-08
usb: delete non-required instances of include <linux/init.h>
Paul Gortmaker
2014-01-03
USB: pl2303: switch to generic TIOCMIWAIT implementation
Johan Hovold
2014-01-03
USB: pl2303: only wake up MSR queue on changes
Johan Hovold
2014-01-03
USB: pl2303: clean up line-status handling
Johan Hovold
2014-01-03
USB: pl2303: make type data const
Johan Hovold
2014-01-03
USB: pl2303: use C_CMSPAR macro
Johan Hovold
2014-01-03
USB: pl2303: use direct baud-rate encoding when possible
Johan Hovold
2014-01-03
USB: pl2303: add helper function for direct baud-rate encoding
Johan Hovold
2014-01-03
USB: pl2303: refactor baud-rate divisor handling
Johan Hovold
2014-01-03
USB: pl2303: enforce baud-rate limits before lookup
Johan Hovold
2014-01-03
USB: pl2303: refactor baud-rate table lookup
Johan Hovold
2014-01-03
USB: pl2303: rename pl2303_encode_baud_rate
Johan Hovold
2014-01-03
USB: pl2303: add device-type abstraction
Johan Hovold
2014-01-03
USB: pl2303: add quirk for legacy devices
Johan Hovold
2014-01-03
USB: pl2303: clean up type handling
Johan Hovold
2014-01-03
USB: pl2303: use speed_t for baud rates
Johan Hovold
2014-01-03
USB: pl2303: add line-status quirk for Siemens phones
Johan Hovold
2014-01-03
USB: pl2303: remove redundant line-request call
Johan Hovold
2014-01-03
USB: pl2303: add error handling to line requests
Johan Hovold
2014-01-03
USB: pl2303: add error handling to set_control_lines
Johan Hovold
2014-01-03
USB: pl2303: add error handling to vendor read and write functions
Johan Hovold
2014-01-03
USB: pl2303: clean up driver somewhat
Johan Hovold
2014-01-03
USB: pl2303: remove bogus delta_msr_wait wake up
Johan Hovold
2014-01-03
USB: serial: remove redundant OOM messages
Johan Hovold
2014-01-03
USB: serial: clean up ioctl debugging
Johan Hovold
2014-01-03
USB: pl2303: fix data corruption on termios updates
Johan Hovold
2013-12-02
USB: pl2303: fixed handling of CS5 setting
Colin Leitner
2013-11-01
Revert "USB: pl2303: restrict the divisor based baud rate encoding method to ...
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: do not round to the next nearest standard baud rate for ...
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: move the two baud rate encoding methods to separate func...
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: increase the allowed baud rate range for the divisor bas...
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: also use the divisor based baud rate encoding method for...
Greg Kroah-Hartman
2013-11-01
Revert "usb: pl2303: add two comments concerning the supported baud rates wit...
Greg Kroah-Hartman
2013-11-01
Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_star...
Greg Kroah-Hartman
2013-11-01
Revert "pl2303: improve the chip type information output on startup"
Greg Kroah-Hartman
2013-11-01
Revert "pl2303: improve the chip type detection/distinction"
Greg Kroah-Hartman
2013-11-01
Revert "USB: pl2303: distinguish between original and cloned HX chips"
Greg Kroah-Hartman
2013-09-17
USB: pl2303: distinguish between original and cloned HX chips
Frank Schäfer
2013-08-14
pl2303: improve the chip type detection/distinction
Frank Schäfer
2013-08-14
pl2303: improve the chip type information output on startup
Frank Schäfer
2013-08-14
pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()
Frank Schäfer
2013-08-12
usb: pl2303: add two comments concerning the supported baud rates with HX chips
Frank Schäfer
2013-08-12
usb: pl2303: also use the divisor based baud rate encoding method for baud ra...
Frank Schäfer
2013-08-12
usb: pl2303: increase the allowed baud rate range for the divisor based encod...
Frank Schäfer
2013-08-12
usb: pl2303: move the two baud rate encoding methods to separate functions
Frank Schäfer
2013-08-12
usb: pl2303: remove 500000 baud from the list of standard baud rates
Frank Schäfer
2013-08-12
usb: pl2303: do not round to the next nearest standard baud rate for the divi...
Frank Schäfer
[next]